Diagnostics - Cradlepoint IBR350 User Manual

User Manual / IBR350
DEVICE OPTIONS
Reboot Options
• Reboot the Device: Manually restart the
router.
• Factory Reset Router: Reset the router to its
original settings. Once reset your SSID and
admin password will match the sticker on the
bottom of the router.
• Device Console: Access router's command line
interface (CLI) console.
Scheduled Reboot
• Scheduled Reboot: Router will restart at
user-specified time.
• Enable Watchdog Reboot: Router will restart
when it determines an unrecoverable error
condition has occurred.

DIAGNOSTICS

Ping Test
A simple test to check Internet connectivity.
Type the Hostname or IP address of the
computer you want to ping and click the 'Ping'
button.
Speed Test
• Tests Against Cradlepoint Server - Up to
ten speed tests are permitted against a
Cradlepoint server.
• WAN Device - The WAN Device that is
selected will have the test run on it. If no
device is selected then the highest priority
connected device will be used.
• Custom Server - Type the Hostname or IP
address of the server to which you wish to
perform a test. If left empty the test will
be done to a Cradlepoint server.
• Custom Port (Optional) - The port to which
the test is directed.
• Max Duration - The Max Duration is the
Maximum amount of time for which the
test should be run. The test may finish
sooner if sufficient data is collected.
• Data Limit - The Data Limit is the limit of how much data will be transferred while measuring the connection
speed; this should be limited to reduce the expense of a speed test. Setting the limit to 0 will cause the test
to run until enough data is collected or the duration limit is met.
• Test Type - Select the type of test you would like to run. TCP Upload will test speed going to the server, TCP
Download will test speed coming to the client, and UDP will measure the speed going to the server.
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
5/6/16
66