Networking; Local Networks - Cradlepoint IBR350 User Manual

User Manual / IBR350

NETWORKING

Local Networks

VLAN Interfaces
Tunnels
Routing
QoS
DNS Servers
Client Data Usage
LOCAL NETWORKS
ETHERNET PORTS
Ethernet Port Configuration
provides controls for your
router's Ethernet port.
While default settings
will be sufficient in most
circumstances, you have the
ability to control: Mode (WAN
or LAN) and Link Speed. Additional controls for WAN ports are available in CONNECTION MANAGER.
Mode: WAN or LAN.
• Internet (WAN) is used as a possible source of Internet for the router
• Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet
cable.
Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.
• Auto
• 10Mbps - Half Duplex
• 10Mbps - Full Duplex
• 100Mbps - Half Duplex
• 100Mbps - Full Duplex
• 1000Mbps - Full Duplex
DHCP SERVER
DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP
addresses to the computers and other devices on each local area network (LAN). In this section you can view a
list of assigned IP addresses and reserve IP addresses for particular devices.
Active Leases: A list of devices that have been provided DHCP leases. The DHCP server automatically assigns
these leases. This list will not include any devices that have static IP addresses on the network. Select a device
and click Reserve to add the device and its IP address to the list of Reservations.
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
5/6/16
24