Cradlepoint ARC CBA850 Manual
  1. Manuals
  2. Brands
  3. Cradlepoint Manuals
  4. Wireless Router
  5. ARC CBA850
  6. Manual

Cradlepoint ARC CBA850 Manual

Cradlepoint arc cba850 cellular broadband adapter
Hide thumbs Also See for ARC CBA850:
Table of Contents

Advertisement

Quick Links

www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Advertisement

Table of Contents
loading

Related Manuals for Cradlepoint ARC CBA850

Summary of Contents for Cradlepoint ARC CBA850

  • Page 1 www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 2: Trademarks

    PREFACE Cradlepoint reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. MANUAL REVISIONS Revision Date Description Author Apr. 28, 2015 Initial release for Firmware version 5.4.0...

  • Page 3: Table Of Contents

    ................ 46 TATISTICS ............3 YSTEM EQUIREMENTS ..............48 YSTEM CBA850 O ............4 VERVIEW ARC CBA850 S ........6 RADLEPOINT ERIES 6 NETWORK SETTINGS ............49 2 HARDWARE OVERVIEW ..........12 ............50 ONTENT ILTERING DHCP S ..............54 ERVER .........
  • Page 4 ........... 133 10 APPENDIX ..............155 NTERPRISE LOUD ANAGER ............135 ERIAL EDIRECTOR ......155 EGULATORY AND AFETY NFORMATION SNMP C ........... 138 ONFIGURATION ........ 157 ARRANTY IABILITY RIVACY ............141 YSTEM ONTROL ............158 PECIFICATIONS ............142 YSTEM OFTWARE 9 GLOSSARY..............

  • Page 5: Introduction

    ARC CBA850LPE-GN – 4G LTE/HSPA+/EVDO for T-Mobile in US and Rogers, Bell, and TELUS in Canada System Requirements • An Internet source: a Cradlepoint 3G/4G business-grade modem or USB broadband data modem with active subscription • Windows 2000/XP/7, Mac OS X, or Linux computer •...

  • Page 6: Cba850 Overview

    FAILOVER MADE SIMPLE The Cradlepoint CBA850 3G/4G cellular broadband adapter provides IP passthrough capabilities for any device that requires wireless broadband access. For most applications, simply connect the CBA850 to an existing CPE router configured for WAN failover, and it’s ready to go.
  • Page 7 CradleCare – Access the Experts 24/7 Cradlepoint understands how important and critical network uptime is to your business. We have a knowledgeable enterprise technical support staff that is available anytime via phone, chat, or email to protect your investment. Our experts will expedite issue resolution and provide flexible device-by-device solutions to help maximize operational efficiency.

  • Page 8: Cradlepoint Arc Cba850 Series

    Cradlepoint ARC CBA850 Series ARC Series includes a Cradlepoint 3G/4G business-grade modem with the CBA850 and creates an effortless instant network from high-speed wireless broadband. Cradlepoint integrated business-grade modems are specifically designed to provide the highest level of performance, reliability, and security for 24x7 business-critical applications.
  • Page 9 ARC CBA850LPE-VZ – 4G LTE/HSPA+/EVDO for Verizon Technology: LTE, HSPA+, EVDO Rev A Downlink Rates: LTE: 100 Mbps; HSPA+: 21.1 Mbps; EVDO: 3.1 Mbps (theoretical) Uplink Rates: LTE: 50 Mbps; HSPA+: 5.76 Mbps; EVDO: 1.8 Mbps (theoretical) Frequency Bands: • LTE: Band 2 (1900 MHz), Band 4 –...
  • Page 10 ARC CBA850LPE-AT – 4G LTE/HSPA+/EVDO for AT&T Technology: LTE, HSPA+, EVDO Rev A Downlink Rates: LTE: 100 Mbps; HSPA+: 21.1 Mbps; EVDO: 3.1 Mbps (theoretical) Uplink Rates: LTE: 50 Mbps; HSPA+: 5.76 Mbps; EVDO: 1.8 Mbps (theoretical) Frequency Bands: • LTE: Band 2 (1900 MHz), Band 4 –...
  • Page 11 ARC CBA850LPE-SP – 4G LTE/HSPA+/EVDO for Sprint Technology: LTE, HSPA+, EVDO Rev A Downlink Rates: LTE: 100 Mbps; HSPA+: 21.1 Mbps; EVDO: 3.1 Mbps (theoretical) Uplink Rates: LTE: 50 Mbps; HSPA+: 5.76 Mbps; EVDO: 1.8 Mbps (theoretical) Frequency Bands: • LTE: Band 2 (1900 MHz), Band 4 –...
  • Page 12 ARC CBA850LP3-EU – 4G LTE/HSPA+ for Europe Technology: LTE, HSPA+ Downlink Rates: LTE: 100 Mbps; HSPA+: 21.1 Mbps (theoretical) Uplink Rates: LTE: 50 Mbps; HSPA+: 5.76 Mbps (theoretical) Frequency Bands: • LTE: Band 1 (2100 MHz), Band 3 (1800 MHz), Band 7 (2600 MHz), Band 8 (900 MHz), Band 20 (800 MHz) •...
  • Page 13 ARC CBA850LPE-GN – 4G LTE/HSPA+/EVDO for T-Mobile in US and Rogers, Bell, and TELUS in Canada Technology: LTE, HSPA+, EVDO Rev A Downlink Rates: LTE: 100 Mbps; HSPA+: 21.1 Mbps; EVDO: 3.1 Mbps (theoretical) Uplink Rates: LTE: 50 Mbps; HSPA+: 5.76 Mbps; EVDO: 1.8 Mbps (theoretical) Frequency Bands: •...

  • Page 14: Hardware Overview

    2 HARDWARE OVERVIEW www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 15: Ports, Buttons, And Switches

    Ports, Buttons, and Switches RIGHT VIEW BOTTOM VIEW REAR VIEW LAN Port: The CBA850 has two Ethernet ports for local network connections. LAN2 can also be used for PoE (optional). NOTE: USB port may not be used for external modem if router is being run using PoE.
  • Page 16 DC Power Port: Attach the included power supply. Reset: Return your CBA850 to factory default settings by pressing and holding the Reset button. This button is recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds to initiate reset. This erases configuration changes and resets the administrator password to the Default Password found on the product label.

  • Page 17: Leds

    LEDs Modem Signal Strength: The bar LEDs indicate the signal strength from the active 3G/4G modem (Cradlepoint business-grade modem or USB modem). A blinking LED indicates ½ bar. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 18: Quick Start

    3 QUICK START Basic Setup 1. Insert an activated SIM into the integrated modem. 2. Reinsert the integrated modem. 3. Attach modem cover and insert screw if desired. 4. Attach included modem antennas. 5. Connect to a power source. 6. Connect to a computer or other network equipment. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 19: Accessing The Administration Pages

    Accessing the Administration Pages The CBA850 can be used immediately without any configuration changes, but to configure any of the advanced features of the CBA850, you need to log into the administration pages: • Access your router’s Administrator Login screen by opening a web browser window and typing “cp/”...

  • Page 20: Common Problems

    Common Problems This section contains some of the most common issues faced by users of the CBA850. Please visit Cradlepoint Knowledge Base at http://knowledgebase.Cradlepoint.com/ for more help and answers to your other questions. 3.3.1 You Cannot Connect to the Internet with a Cradlepoint Business-grade Modem Make sure that you have an active data plan and that your modem has been activated.
  • Page 21 Then log into the router administration pages and manually upload the firmware. Go to System Settings → System Software and click on “Manual Firmware Upload." If you are still unable to access the Internet after following the above directions, contact Cradlepoint Technical Support for further assistance.

  • Page 22: Web Interface -- Essentials

    4 WEB INTERFACE -- ESSENTIALS The CBA850 has a Web interface for configuration and administration of all features. The interface is organized with five tabs at the top of the screen: • Getting Started • Status • Network Settings • Internet •...

  • Page 23: Administrator Login

    Administrator Login To access the administration pages, open a Web browser and type the hostname “cp/” or IP address “http://192.168.0.1” into the address bar. The Administrator Login page will appear. Log in using your administrator password. Initially, this password can be found on the bottom of the CBA850 unit as the Default Password.
  • Page 24 • Model Number: CBA850 • Internet Connection: Connected/Disconnected MODEM DETAILS • Manufacturer: The name of the modem manufacturer (Cradlepoint, Novatel, etc.) • Model: The name of the modem model • Signal: The strength of the signal (dBm) • Mode: (LTE, EVDO, HSPA, etc.)

  • Page 25: Getting Started - First Time Setup

    First Time Setup Wizard. (Otherwise, go to Getting Started → First Time Setup). 4. Cradlepoint recommends that you change the router’s ADMINISTRATOR PASSWORD, which is used to log in to the administration pages. 5. You can select your TIME ZONE from a dropdown list. (This may be necessary to properly show time in your router log, but typically your router will automatically determine your time zone through your browser.) Click NEXT.
  • Page 26 6. Configuring Your Access Point Name (APN) If you are using a SIM-based modem (LTE/GSM/HSPA) with your Cradlepoint router, you may need to configure the APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to confirm the appropriate one to use.
  • Page 27 7. Modem Authentication Some modems require a username and password to be entered to authenticate with a carrier. Do not fill in these fields unless you are sure your modem needs authentication. • Authentication Protocol – Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one. Select from: o Auto o Pap...
  • Page 28 8. Configuring Failure Check It is possible for a WAN interface to go down without the router recognizing the failure. (For example: the carrier for a cellular modem goes dormant.) Enable Failure Check to ensure that you can get out to the Internet via your primary WAN connection. This option is disabled by default because it may use data unnecessarily.
  • Page 29 9. Review the details and record your administrative password. Click APPLY to save the settings and update them to your router. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 30: Quick Links

    Quick Links The Cradlepoint logo in the upper left-hand corner of all the administration pages is a link to the Dashboard (Status → Dashboard), which displays fundamental information about the router. The black bar across the top provides quick access to important information and controls.

  • Page 31: Configuration Pages

    Configuration Pages The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal the following dropdown menus. Getting Started Status Network Settings Internet System Settings Enterprise Cloud Manager Client List Content Filtering Connection Manager Administration...
  • Page 32 • If you want to change the content filtering settings for the network created by the CBA850, go to the Network Settings tab. • If you want to track the data usage for your Internet source (such as your Cradlepoint business-grade modem), go to the Internet tab.

  • Page 33: Enterprise Cloud Manager Registration

    Enterprise Cloud Manager Registration To register your device with Cradlepoint Enterprise Cloud Manager, navigate to Getting Started → Enterprise Cloud Manager Registration. Input your ECM Username and ECM Password and click Register. You have now registered the device with Enterprise Cloud Manager.

  • Page 34: Status

    5 STATUS The Status tab displays information about many different aspects of the router. It provides access to eight submenu options: • Client List • Dashboard • GPS • Internet Connections • LLDP • Routing • Statistics • System Logs www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 35: Client List

    Client List The Client List displays the Hostname, IP, and MAC of the device connected to your router. Hostname: The name by which each computer or device in a network is known. IP: The IP address, or “Internet Protocol address”, specifies a location for each device. MAC: This is the "MAC address", a factory-assigned identifier used to identify a specific attached computer or device.

  • Page 36: Dashboard

    After the initial setup of the router, every time you log in you will automatically be directed to this Dashboard. Also, you can click on the Cradlepoint logo in the upper left-hand corner to return to the Dashboard from any page.
  • Page 37 ROUTER INFORMATION “Detailed Info” links to System Settings → Administration. • Product: CBA850 • Serial: Device serial number • Firmware: Gives the number of the current firmware version • Build Date: Year-month-day-hours-minutes-seconds for the most recent firmware upgrade • MAC Address: The router’s unique identifier •...
  • Page 38 LOCAL NETWORKS “Detailed Info” links to Network Settings → Local Networks. • Clients: The number of current clients. For each network, the following information is displayed: • Network Name: IP Address/Netmask o Route Mode: NAT (Network Address Translation), Standard (NAT-less), IP Passthrough, or Disabled. o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.

  • Page 39: Gps

    If GPS support is enabled and a modem capable of providing GPS coordinates is connected, this page shows a graphical view of your router's location. See the GPS section in System Settings → Administration to enable GPS support. GPS information is only displayed if 1) the modem supports GPS, 2) your carrier allows the GPS functionality, and 3) the modem has sufficient GPS signal strength.

  • Page 40: Internet Connections

    Internet Connections The Internet Connections submenu option provides a list of attached WAN devices used as the Internet source for the CBA850. Select one of these devices to see detailed information about that particular device. See screenshots below for included detailed information. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
  • Page 41 www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
  • Page 42 www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
  • Page 43 www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
  • Page 44 www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
  • Page 45 www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 46: Lldp

    LLDP The LLDP (Link Layer Discovery Protocol) submenu option provides a list of devices connected by Ethernet that have LLDP enabled. Double-click on a device to view details for that device. The information displayed in this popup window varies significantly for different types of devices with different LLDP implementations.

  • Page 47: Routing

    Routing System Routes displays routes associated with networks connected to the router. Static Routes displays user-specified routes configured in Network Settings → Routing, www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 48: Statistics

    Statistics The Statistics submenu option displays basic traffic statistics. Wireless Statistics: View the signal strength and other wireless modem information. The wireless device’s signal strength will only be displayed as long as it supports “Live Diagnostics.” Sample rate and size can be adjusted from the dropdown boxes. Data Usage: A measure of amount of information that is currently being sent or received through the network.
  • Page 49 Failover/Failback/Load Balance: An easy way to view current connective states of the devices plugged into the router as compared to the past. Sample rate and size can be adjusted from the dropdown boxes. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 50: System Logs

    System Logs The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The log options allow you to filter the router logs so you can easily find relevant messages.

  • Page 51: Network Settings

    6 NETWORK SETTINGS The Network Settings tab provides access to seven submenu options for administering the following functions/tasks. These functions are all related to controlling the LAN (Local Area Networks), the networks you set up with the CBA850. • Content Filtering •...

  • Page 52: Content Filtering

    Content Filtering You have two main options for filtering content in a network created by your router. 1. Network WebFilter Rules: Create a list of websites that will be either disallowed or allowed. Customize the filter settings for each network. (These rules will not block HTTPS websites.) 2.
  • Page 53 Click Add or Edit to open the Filter Rule Editor. • Assigned Network: Select either “All Networks” or one of your LAN networks from the dropdown list. • Domain/URL/IP: Enter the Domain Name or URL (address) of the website you wish to control access for, e.g.
  • Page 54 6.1.2 Default Filter Settings Use Default Network Filter Settings together with Network WebFilter Rules to control website access. All of your networks are set to allow website access by default. Select a network and click Edit to change the default filter settings. Default Action: Select from the following dropdown options: •...
  • Page 55 6.1.3 Cloud Based Filtering/Security Select a third-party Cloud Provider from the dropdown list. • Disabled • Umbrella by OpenDNS UMBRELLA BY OPENDNS Umbrella by OpenDNS is a cloud- based web filtering and security solution that protects you online by filtering websites. Go to http://www.opendns.com/business- security/ for information about...

  • Page 56: Dhcp Server

    DHCP Server DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP addresses to the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP addresses and reserve IP addresses for particular devices.

  • Page 57: Dns

    DNS, or Domain Name System, is a naming system that translates between domain names (www.Cradlepoint.com, for example) and Internet IP addresses (206.207.82.197). A DNS server acts as an Internet phone book, translating between names that make sense to people and the more complex numerical identifiers. The DNS page for the CBA850 has these distinct functions: •...
  • Page 58 6.3.2 Dynamic DNS Configuration The Dynamic DNS feature allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. When you use a Dynamic DNS service provider, you can enter your host name to connect to your server, no matter what your IP address is.
  • Page 59 6.3.3 Advanced Dynamic DNS Settings Update period (hours). (Default: 576) The time between periodic updates to the Dynamic DNS if your dynamic IP address has not changed. The timeout period is entered in hours so valid values are from 1 to 8760. Override External IP.

  • Page 60: Firewall

    Firewall The router automatically provides a firewall. Unless you configure the router to the contrary, the router does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to cyber attackers. However, some network applications cannot run with a tight firewall. Those applications need to selectively open ports in the firewall to function correctly.
  • Page 61 IPv6 providers, but it cannot be used effectively in all situations. The primary purpose for Cradlepoint’s NPT implementation is for failover/failback and load balancing setups. LAN clients can potentially retain the original IPv6 lease information and may experience a more seamless transition when WAN connectivity changes than if not utilizing NPT.
  • Page 62 • Static – Always use a static IPv6 translation (input the prefix here) Transitioning from short prefix to a longer prefix (such as from /48 to /64) is not without problems, as some of the LANs may lose IPv6 connectivity. 6.4.3 IP Filter Rules (Advanced) An "Incoming"...
  • Page 63 IP Source/IP Destination • IP Negation: Match on any IP address that is NOT in the specified IP network range. • Network IP: Optional field to specify a matching network IP address for this rule to match against. • Netmask: Use this to define a subnet size this rule will match against. •...
  • Page 64 6.4.4 DMZ: DeMilitarized Zone (Advanced) A DMZ host is effectively not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the DMZ IP address. Typical uses involve running a public Web server or sharing files. Input the IP Address of a single device in your network to create a DeMilitarized Zone for that device.
  • Page 65 • FTP: To allow normal mode when using File Transfer Protocol. This is not needed for passive mode. This is enabled by default. • IRC: For Direct Client to Client (DCC) transfer when using Internet Relay Chat. You may wish to forward TCP port 113 for incoming identd (RFC 1413) requests.
  • Page 66 REMOTE ADMINISTRATION ACCESS CONTROL EDITOR IP Address: The IP address that will be allowed to access administrative services through the WAN. Netmask (Optional): The netmask allows you to specify what IP address sets will be allowed access. If this field is left empty a netmask of 255.255.255.255 will be used, which means that only the single specified IP address would have remote administration access.

  • Page 67: Local Networks

    Local Networks This section is used to configure the settings for networks created by your router. The user can set up multiple networks on the CBA850, each with its own unique configuration and its own selection of interfaces. Each local network can be attached to either (or both) of the following types of interfaces: •...
  • Page 68 6.5.1 Local IP Networks Local IP Networks displays the following information for each network: • Network Name and IP address/Netmask (along the top bar) • Enabled (Yes/No) • DHCP Mode (e.g. DHCP Server mode) • Schedule (Enabled/Disabled – See the Schedule tab in the Local Network Editor) •...
  • Page 69 Name: This primarily helps to identify this network during other administration tasks. Hostname: [Default: cp (for Cradlepoint)] The hostname is the DNS name associated with the router's local area network IP address. NOTE: You can access the router’s administration pages by typing the hostname into your browser, so if you change “cp” to another hostname, you can access the administration pages through the new hostname.
  • Page 70 IPV4 SETTINGS IP Address: This is the address used by the router for local area network communication. Changes to this parameter may require a restart to computers on this network. Each network must have a distinct IP address. Most users will want an address from one of the following private IP ranges: •...
  • Page 71 IPV6 SETTINGS IPv6 must be enabled through the WAN initially: go to Internet → Connection Manager to enable IPv6. IPv6 Address Source: By default, this is set to Delegated, which means the IPv6 address range for the LAN is passed through from the WAN side. Change this to Static to input your own IPv6 address range here, or select None to explicitly disable IPv6 LAN connectivity.
  • Page 72 INTERFACES Select network interfaces to attach to this network. Choose from the Ethernet ports and VLAN interfaces. Double-click on an interface shown on the left in the Available section to move them to the Selected section on the right (or highlight an interface and click the “+”...
  • Page 73 ACCESS CONTROL Tune the access control settings of this network to match the intended use. Simply select or deselect any of the following: • LAN Isolation: When checked, this network will NOT be allowed to communicate with other local networks. •...
  • Page 74 IPV4 DHCP Changing settings for the IPv4 DHCP server is optional. The default selections are almost always sufficient. DHCP Server: (Default: Enabled) When the DHCP server is enabled, users of your network will be able to automatically connect to the Internet without any special configuration.
  • Page 75 Custom Options: Input a custom DHCP option by first clicking the Custom Options field to enable it and then clicking “Add” at the top of the table that appears. There are close to 200 possible DHCP options available. One of the more common uses is to assign a VoIP phone server using option 66 (Server name).
  • Page 76 IPV6 ADDRESSING Address Configuration Mode SLAAC Only – SLAAC stands for stateless address autoconfiguration. The router regularly generates a router advertisement that includes network prefix and routing information, allowing clients to autogenerate an address and start communicating on the network. Clients utilize neighbor discovery protocols to ensure multiple clients on the subnet have not chosen an identical address.
  • Page 77 SCHEDULE Set up a schedule for this network interface. This allows an interface to be enabled or disabled during specific hours of a day. For example, use this to limit the network to business hours. Schedule Service: (Default: Disabled.) Select to enable. This will open a configurable chart for setting the schedule.
  • Page 78 6.5.3 Local Network Interfaces Each LAN type—Ethernet and VLAN—has a separate section with configuration options. Unless the default configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor (see above).
  • Page 79 ETHERNET PORT GROUP EDITOR A Port Group represents a logical grouping of Ethernet ports. Any computers physically connected to ports in a group will be allowed to freely communicate with each other. NOTE: You must separately ensure that this logical interface is attached to a Local IP Network in the top panel of this page.
  • Page 80 VLAN INTERFACES A virtual local area network, or VLAN, functions as any other physical LAN, but it enables computers and other devices to be grouped together even if they are not physically attached to the same network switch. To enable a VLAN, select a VID (virtual LAN ID) and an Ethernet port group through which users can access the VLAN. Then go back up to the Local Network Editor to attach your new VLAN to a network.

  • Page 81: Mac Filter/Logging

    MAC Filter/Logging A MAC (Media Access Control) address is a unique identifier for a computer or other device. This page allows you to manage clients by MAC address. You can filter clients by MAC addresses and/or keep a log of devices connected to your router. 6.6.1 Filter Configuration The MAC Filter allows you to...
  • Page 82 6.6.2 MAC Logging Configuration Enable MAC Logging: Enabling MAC Logging will cause the router to log MAC addresses that are connected to the router. MAC addresses that you do not want to have logged (addresses that you expect to be connected) should be added to the “Ignored MAC Addresses”...

  • Page 83: Routing

    Routing Add a new static route to the IP routing table or edit/remove an existing route. Static routes are used in networks with more than one layer, such as when there is a network within a network so that packet destinations are hidden behind an additional router.

  • Page 84: Internet

    7 INTERNET The Internet tab provides access to three submenu items for managing a variety of Internet connection options. • Connection Manager • Data Usage • WAN Affinity/Load Balancing www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 85: Connection Manager

    Connection Manager The router can establish an uplink via any modems plugged into a modem port. If there is more than one modem attached and the primary connection fails, the router will automatically attempt to bring up a new link on another device. This feature is called failover. If Load Balance is enabled, multiple WAN devices establish a link at the same time.
  • Page 86 7.1.2 Device Configuration Clicking on a device reveals the following information: • State (Connected, Available, etc.) • Port • UID (Unique identifier. This could be a name or number/letter combination.) • IP Address • Gateway • Netmask • Stats: bytes in, bytes out •...
  • Page 87 7.1.3 General Settings • Enabled: Select/deselect to enable/disable. • Force NAT: Normally the LAN Route Mode controls the use of NAT (network address translation). When this option is selected the router will always perform NAT when traffic is sent out from this device. •...
  • Page 88 IPV4 FAILURE CHECK (ADVANCED) If this is enabled, the router will check that the highest priority active WAN interface can get to the Internet even if the WAN connection is not actively being used. If the interface goes down, the router will switch to the next highest priority interface available.
  • Page 89 that all of your WAN connections can use. For best results, select an established public IP address. For example, you might ping Google Public DNS at 8.8.8.8 or Level 3 Communications at 4.2.2.2. IPV6 FAILURE CHECK (ADVANCED) These settings match IPv4 Failure Check; the only difference in the UI is that the ping address uses IPv6.
  • Page 90 7.1.4 IP Overrides IP overrides allow you to override IP settings after a device’s IP settings have been configured. Only the fields that are filled out will be overridden. Override any of the following fields: • IP Address • Subnet Mask •...
  • Page 91 7.1.5 IPv6 Settings The IPv6 (http://en.wikipedia.org/wiki/IPv6) configuration allows you to enable and configure IPv6 for a WAN device. These settings should be configured in combination with the IPv6 LAN settings (go to Network Settings → Local Networks, select the LAN under Local IP Networks, and click Edit) to achieve the desired result.
  • Page 92 Enable IPv6 and select the desired IPv6 connection method for this WAN interface. • Disabled (default) – IPv6 disabled on this interface. • Auto – IPv6 will use automatic connection settings (if available). • Static – Input a specific IPv6 address for your WAN connection. This is provided by the ISP if it is supported. •...
  • Page 93 AUTO IPv6 auto-configuration mode uses DHCPv6 and/or SLAAC to configure the IPv6 networks. When you select Auto, all of the following settings are optional (depending on your provider’s requirements): • PD Request Size – Prefix Delegation request size. This is the size of IPv6 network that will be requested from the ISP to delegate to LAN networks.
  • Page 94 STATIC As with IPv4, static configuration is available for situations where the WAN IPv6 topology is fixed. • IPv6 Address/CIDR – Input the IPv6 static IP address and mask length provided by your ISP (see http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing for an explanation of CIDR). •...
  • Page 95 6TO4 TUNNEL Out of the box, 6to4 is the simplest mode to enable full end-to-end IPv6 connectivity in an organization if the upstream ISP properly routes packets to and from the 6to4 unicast relay servers. • Primary IPv6 DNS Server – (optional) Depending on your provider, this may be required. This only takes effect if the default global DNS setting on the Network Settings →...
  • Page 96 6IN4 TUNNEL The 6in4 tunnel mode utilizes explicit IPv4 tunnel endpoints and encapsulates IPv6 packets using 41 as the specified protocol type in the IP header. A 6in4 tunnel broker provides a static IPv4 server endpoint, decapsulates packets and provides routing for both egress and ingress IPv6 packets.
  • Page 97 6RD TUNNEL IPv6 Rapid Deployment (6rd) is a method of IPv6 site configuration derived from 6to4. It is different from 6to4 in that the ISP provides explicit 6rd infrastructure that handles the IPv4 ↔ IPv6 translation within the ISP network. 6rd is considered more reliable than 6to4 as the ISP explicitly maintains infrastructure to support tunneled IPv6 traffic over their IPv4 network.
  • Page 98 7.1.6 Modem Settings Not all modems will have all of the options shown below; the available options are specific to the modem type. On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is made as needed.
  • Page 99 AT Config Script: Enter the custom AT configuration scripts(s) to be applied to the modem at configuration time, one time shortly after plug of the modem. Each script must be entered on a separate line. The interpretation of the script and associated response will be logged so you should check the system log to make sure there were no error.
  • Page 100 • Primary HA. • Secondary HA. • AAA SPI: AAA Security Parameter Index. • HA SPI: HA Security Parameter Index. 7.1.8 SIM/APN/Auth Settings SIM PIN: PIN number for a GSM modem with a locked SIM. Authentication Protocol: Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one.
  • Page 101 7.1.9 Update/Activate a Modem Some 3G/4G modems can be updated and activated while plugged into the router. Updates and activation methods vary by modem model and service provider. Possible methods are: PRL Update, Activation, and FUMO. All supported methods will be displayed when you select your modem and click “Control”.
  • Page 102 Use Manual Firmware Upgrade to instead manually upload firmware from a local computer or device. NOTE: Only Cradlepoint integrated modems have this firmware upgrade option. RESET THE MODEM Click on the Reset button to power cycle the modem.
  • Page 103 7.1.10 Configuration Rules (Advanced) This section allows you to create general rules that apply to the Internet connections of a particular type. These can be general or very specific. For example, you could create a rule that applies to all WiMAX modems, or a rule that only applies to an Internet source with a particular MAC address.
  • Page 104 WAN CONFIGURATION RULE EDITOR After clicking “Add” or “Edit,” you will see a popup with the following tabs: • Filter Criteria • General Settings • IP Overrides • IPv6 Settings • Ethernet Settings • Modem Settings • WiMAX Settings • CDMA Settings •...
  • Page 105 • MAC Address: Select WiMAX modem by MAC Address. • Unique ID: Select by ID. This is generated by the router and displayed when the device is connected to the router. Condition: Select “is,” “is not,” “starts with,” “contains,” or “ends with” to create your condition’s statement. Value: If the correct values are available, select from the dropdown list.

  • Page 106: Data Usage

    The purpose of this agreement is to ensure that you understand that the data numbers for the CBA850 may not perfectly match those of your carrier: Cradlepoint cannot be held responsible. You must accept the agreement by clicking Yes in order to begin creating data usage rules.
  • Page 107 7.2.1 Data Usage Rules The Date Usage Rule display shows basic information for each rule you have created (including rules created with a template). The following information is displayed: • Rule Name • Enabled: True/False • Date for Rule Reset •...
  • Page 108 all interfaces with these rules at a similar percentage utilization of data (e.g. 10%, 50%, 90%) as the cycle progresses, rather than quickly using 100% of a fast 1GB capped interface while using only a fraction of a slow 10GB capped interface, thus leaving the rest of the cycle with only the slow interface.
  • Page 109 7.2.2 Template Configuration Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will automatically have its own rule created. For example, you can set a template rule for all mobile data modems that causes your router to send an alert after 1000 MB of usage in a month. When you attach a new 4G USB modem, your template will immediately create a new Data Usage Rule for the attached modem that sends the alert as specified.

  • Page 110: Wan Affinity And Load Balancing

    WAN Affinity and Load Balancing WAN affinity and load balancing both require multiple WAN devices, which is not typical usage LOAD BALANCE Select the Load Balance Algorithm from the following dropdown options: • Round-Robin: Evenly distribute each session to the available WAN connections. •...
  • Page 111 DSCP (DiffServ): Differentiated Services Code Point is the successor to TOS (Type of Service). Use this field to select traffic based on the DSCP header in each IP packet. This field is sometimes set by latency sensitive equipment such as VoIP phones. If you know specific DSCP values, you can input one here.
  • Page 112 WAN Binding Type: You have several options for specifying the type of WAN interface(s) you want associated with your rule. Designate the interface(s) by Port, Manufacturer, Model, Type, Serial Number, MAC Address, or Unique ID. This selection will create a dropdown list of options to complete a sentence with the following form: “When ____ is ____,”...
  • Page 113 for each WAN device you will be load balancing. Make certain to select the "Use with Load Balancing" checkbox in the Data Usage rule editor. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 114: System Settings

    8 SYSTEM SETTINGS The System Settings tab has seven submenu items that provide access to tools for broad administrative control of the CBA850: • Administration • Device Alerts • Enterprise Cloud Manager • Serial Redirector • SNMP Configuration • System Control •...

  • Page 115: Administration

    Administration Select the Administration submenu item in order to control any of the following functions: • Router Security • System Clock • Local Management • Remote Management • GPS • SMS • System Logging • Router Services 8.1.1 Router Security Advanced Security Mode: When the router is configured to use the advanced security mode, several aspects of the router’s configuration and networking...
  • Page 116 • Local Users • TACACS+ • RADIUS LOCAL USERS Create users with administrative privileges by inputting usernames and passwords in the Advanced User Management table. TACACS+ TACACS+ stands for “Terminal Access Controller Access-Control System plus”. The router will use a TACACS+ server (or two, optionally) to authorize administration.
  • Page 117 RADIUS RADIUS stands for “Remote Authentication Dial In User Service”. The router will use a RADIUS server (or two, optionally) to authorize administration. Server Timeout: If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Users mode to prevent users from being locked out.
  • Page 118 8.1.2 System Clock Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then the router time will be based on when the router firmware was built, which is guaranteed to be wrong.
  • Page 119 8.1.3 Local Management Enable Internet Bounce Pages: Bounce pages show up in your web browser when the router is not connected to the Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then you will just get the usual browser timeout.
  • Page 120 8.1.4 Remote Management Allows a user to enable incoming WAN pings or to change settings for the router from the Internet using the router's Internet address. Allow WAN pings: When enabled the functionality allows an external WAN client to ping the router. Allow Remote Web Administration: When remote administration is enabled it allows access to these administration web pages from the Internet.
  • Page 121 8.1.5 If you have an attached device with GPS support, you can enable a graphical view of your router’s location which will appear in Status → GPS. Users can also configure GPS NMEA GGA format sentence reporting, available through a router-based server and/or a remote server. NOTE: Some carriers disable GPS support in otherwise supported modems.
  • Page 122 $GPGGA – Essential fix data including 3D location and accuracy information Example: $GPGGA,1753405,4916.450,N,12311.127,W,2,06,1.5,117.3,M,−26.574,M,6.0,0138*47 1753405 Time of fix – 17:34:05 UTC 4916.450,N Latitude 49 deg. 16.450 min North 12311.127,W Longitude 123 deg. 11.127 min West Fix quality: • 0 = fix not available •...
  • Page 123 8.1.6 SMS (Short Message Service, or text messaging) requires a cellular modem with an active data plan. SMS is not designed to be a full remote management feature: SMS allows you to connect to the router for a few simple queries or commands with a text messaging service (e.g., from your phone).
  • Page 124 This list is blank by default, which means that the router will accept SMS messages from any phone number. Leaving this blank is unsecure, so Cradlepoint recommends that you add phone numbers to this list. Once any numbers are listed, only those numbers have the ability to connect to the router via SMS.
  • Page 125 HOW TO SEND AN SMS MESSAGE You can send SMS messages to the router via phone or email. The key elements are: 1. the modem’s MDN 2. the SMS password (defined above) 3. the command You must know the MDN (Mobile Directory Number) of the modem to send SMS messages to the router. This is a phone number that can be found under Status →...
  • Page 126 SMS Commands Below is a list of supported SMS messages and the syntax format. Due to security concerns, the set of commands are intentionally limited to those that can configure a modem’s connection, but cannot lock the administrator out due to malicious modem changes. Therefore, if an unsolicited request adjusts the modem’s configuration via SMS, an administrator can still access the modem via SMS.
  • Page 127 uptime: 0:35:13 FW: v4.4.0 eth0: 10/100/1000 Ethernet Switch: connected usb3: MC200P: connected mstatus: Get modem status* • Syntax: <password>,mstatus,[port,] • Example: 1234,mstatus, //return status of highest priority modem • Example: 1234,mstatus,usb1, //return status of modem plugged into port usb1 This command returns info about the indicated modem’s status. The resulting data reflects the modem model number, service type, and connection status and values.
  • Page 128 • Example: 1234,apn,myapn@apn.com,usb1, //set APN for modem in port usb1 userpass: Set the modem's authentication username and password* • Syntax: <password>,userpass,<username>,<userpassword>,[port,] • Example: 1234,userpass,joe,mypassword, //set information of highest priority modem • Example: 1234,userpass,joe,mypassword,usb3, //set information on modem in port usb3 simpin: Set the SIM's PIN* •...
  • Page 129 Sample Debug Session The following is an example of a debug session to discover a modem’s APN is misconfigured and needs to be set. Figure out the state of the modems on the router: 1234,rstatus, Receive the modem’s status and settings: 1234,mstatus, Set the modem’s APN to the correct setting: 1234,apn,broadband,...
  • Page 130 Log to attached USB stick: Only enable this option if instructed by a Cradlepoint support agent. This will write a very verbose log file to the root level of an attached USB stick. Please disable the feature before removing the USB stick, or you may lose some logging data.
  • Page 131 Verbose modem logging: Only enable this option if instructed by a Cradlepoint support agent. Create support log: This functionality allows for a quick collection of system logging. Create this log file when instructed by a Cradlepoint support agent. 8.1.9 Router Services By default, router services (Enterprise Cloud Manager, NTP, etc.) connect to the router via...

  • Page 132: Device Alerts

    Device Alerts The Device Alerts submenu choice allows you to receive email notifications of specific system events. YOU MUST ENABLE AN SMTP EMAIL SERVER TO RECEIVE ALERTS. Alerts can be included for the following: • Firmware Upgrade Available: A firmware update is available for this device.
  • Page 133 8.2.1 SMTP Mail Server Since the CBA850 does not have its own email server, to receive alerts you must enable an SMTP server. This is possible through most email services (Gmail, Yahoo, etc.) Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an example using Gmail: •...
  • Page 134 Retry Attempts: The number of attempts made to send an alert to the mail server. After the attempts are exhausted, the alert is discarded. Retry Delay: The delay between retry attempts. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 135: Enterprise Cloud Manager

    Enterprise Cloud Manager Cradlepoint ECM is a cloud-based management service for configuring, monitoring, and organizing your Cradlepoint routers. Key features include: • Group based configuration management • Health monitoring of router connectivity and data usage • Remote management and control of routers •...
  • Page 136 WiPipe Central client will not start unless the WAN is Ethernet. • Registration URL: Register your router using the code provided by Cradlepoint when you purchase WiPipe Central. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 137: Serial Redirector

    Serial Redirector A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial device can also be accessed by running "serial" from an SSH session. 8.4.1 Telnet to Serial Configuration Enabled: Enabling Telnet to Serial will start a Telnet server that passes its connection to the serial adapter.
  • Page 138 8.4.2 USB Serial Adapter Configuration Baud Rate: Select from the dropdown list. • 50 • 75 • 110 • 134 • 150 • 200 • 300 • 600 • 1200 • 1800 • 2400 • 4800 • 9600 • 19200 Byte Size: The number of bits in a byte.
  • Page 139 Linefeed: Select how you want linefeeds translated (CR = carriage return and LF = line feed). • Ignore • CR/LF • CR • LF www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 140: Snmp Configuration

    SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management. You might use this instead of Cradlepoint Enterprise Cloud Manager if you want to remotely manage a set of routers that include both Cradlepoint and non- Cradlepoint products.
  • Page 141 Get community string: The “Get community string” is used to read SNMP information from the router. This string is like a password that is transmitted in regular text with no protection. Set community string: The “Set community string” is used when writing SNMP settings to the router. This string is like a password. It is a good idea to make it different than the “Get community string.”...
  • Page 142 Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community name. Address for trap server: Enter the address of the host system that you want trap alerts sent to. Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162) 8.5.2 System Information System information via SNMP is Read-Writable by default.

  • Page 143: System Control

    System Control 8.6.1 Device Control Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: This causes the router to restart. Device Console: Launches the device console. 8.6.2 Advanced Control Scheduled Reboot: This causes the router to restart at a user-determined time.

  • Page 144: System Software

    Check the firmware release notes (www.Cradlepoint.com/firmware) for information to decide if you should upgrade. Current Firmware Version: Shows the number of the current firmware and the date it was updated.
  • Page 145 8.7.2 System Config Save/Restore Backup Current Settings: Click on “Save to disk” to save your current settings to a file on a computer. Restore Settings: Click on “Upload from file” to restore your previous settings from a file on a computer. 8.7.3 Firmware Upgrade and System Config Restore Load new firmware and restore your previous settings from a file on a computer without rebooting between steps.

  • Page 146: Glossary

    9 GLOSSARY 802.11 Antenna A family of specifications for wireless local area networks Used to transmit and receive RF signals. (WLANs) developed by a working group of the Institute of AppleTalk Electrical and Electronics Engineers (IEEE). A set of Local Area Network protocols developed by Apple for Access Control List their computer systems.

  • Page 147: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Automatic Private IP Addressing Broadband APIPA. An IP address that a Windows computer will assign itself A wide band of frequencies available for transmitting data. when it is configured to obtain an IP address automatically but no Broadcast DHCP server is available on the network. Transmitting data in all directions at once.

  • Page 148: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Data Default Information that has been translated into binary so that it can be A predetermined value or setting that is used by a program when processed or moved to another device. no user input has been entered for this value or setting. Data Encryption Standard Demilitarized zone Uses a randomly selected 56-bit key that must be known by both...

  • Page 149: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Fiber optic Digital Subscriber Line. High bandwidth Internet connection over A method of sending data through light impulses over glass or telephone lines. plastic wire or fiber. Duplex File server Sending and Receiving data transmissions at the same time. A computer on a network that stores data so that the other computers on the network can access it.

  • Page 150: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Gateway HTTP A device that connects your network to another, like the Internet. Hypertext Transfer Protocol. Used to transfer files from HTTP servers (web servers) to HTTP clients (web browsers). Gbps Gigabits per second. HTTPS HTTP over SSL is used to encrypt and decrypt HTTP Gigabit Ethernet transmissions.

  • Page 151: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Internet A system of worldwide networks that use TCP/IP to allow for Internet Service Provider. Provides access to the Internet to resources to be accessed from computers around the world. individuals or companies. Internet Explorer Java A World Wide Web browser created and provided by Microsoft. A programming language used to create programs and applets for web pages.

  • Page 152: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    for advertising their identity, capabilities, and neighbors on an MPPE IEEE 802 local area network, principally wired Ethernet. Microsoft Point-to-Point Encryption. Used to secure data transmissions over PPTP connections. LPR/LPD Line Printer Requestor/Line Printer Daemon. A TCP/IP protocol for transmitting streams of printer data. Maximum Transmission Unit.

  • Page 153: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Physical layer Network Interface Card. A card installed in a computer or built The first layer of the OSI model. Provides the hardware means of onto the motherboard that allows the computer to connect to a transmitting electrical signals on a data carrier. network.

  • Page 154: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Preamble RS-232C Used to synchronize communication timing between devices on The interface for serial communication between computers and a network. other related devices. Quality of Service. Algorithm used for encryption and authentication. RADIUS Server Remote Authentication Dial-In User Service. Allows remote users A computer on a network that provides services and resources to to dial into a central server and be authenticated in order to other computers on the network.

  • Page 155: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Throughput Stateful Packet Inspection. A feature of a firewall that monitors The amount of data that can be transferred in a given time period. outgoing and incoming traffic to ensure that only valid responses Traceroute to outgoing requests are allowed to pass though the firewall. A utility that displays the routes between your computer and a specific destination.

  • Page 156: Www.4Gon.co.uk Info@4Gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

    Web browser Unshielded Twisted Pair. A utility that allows you to view content and interact with information on the World Wide Web. Virtual Private Network VPN. A secure tunnel over the Internet to connect remote offices or users to their company’s network. Wired Equivalent Privacy.

  • Page 157: Appendix

    (i.e., contain errors), or totally lost. The CBA850 device is not intended for, and Cradlepoint recommends the device not be used in, any critical applications where failure to transmit or receive data could result in property damage or loss or personal injury of any kind (including death) to the user or to any other party. Cradlepoint expressly disclaims liability for damages of any kind resulting from: (a) delays, errors, or losses of any data transmitted or received using the device;...
  • Page 158 Warning: This product is only to be installed by qualified personnel! www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

  • Page 159: Arranty , Liability , Privacy , Etc

    Within thirty (30) days of receipt should the product fail for any reason other than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price. If the purchaser wishes to upgrade or convert to another Cradlepoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purchase of the other product.

  • Page 160: Pecifications

    Specifications MODEL NAME CBA850 Cellular Broadband Adapter Via embedded 3G/4G modem Two Ethernet ports (10/100/1000) BUTTONS/SWITCHES Power, reset LED INDICATORS Power, Ethernet LAN1, Ethernet LAN2, WAN data activity, USB modem status, External USB status indicator, signal strength DIMENSIONS 4.8 x 4.8 x 1.7 in (122 x 122 x 42 mm) CERTIFICATIONS FCC, CE, IC, PTCRB, GCF-CC, carrier (some certifications are specific to particular ARC models) OPERATING TEMPERATURE...
  • Page 161 Copyright © 2015 by Cradlepoint, Inc. All rights reserved. www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...

Table of Contents