User Manual
/
IBR350
•
Enable Login Banner – Add the CLI banner to the
router's login page.
•
Local Domain – The local domain is used as the
suffix for DNS entries of local hosts. This is tied to
the hostnames of DHCP clients as DHCP_HOSTNAME.
LOCAL_DOMAIN.
•
System Identifier – This is a customizable identity
that will be used in router reporting and alerting. The
default value is the product name and the last three
characters of the MAC address of the router.
•
Asset Identifier – This is a customizable string that
will be used in router reporting and alerting.
•
Require HTTPS Connection – Check this box if
you want to encrypt all router administration
communication.
•
Secure HTTPS Port – Enter the port number you want
to use. The default is 443.
•
Enable SSH Server – When the router's SSH server is
enabled you may access the router's command line interface (CLI) using the standards-based SSH protocol.
Use the username "admin" and the standard system password to log in.
•
SSH Server Port – Default: 22.
•
Automatically Set System Identifier – This will automatically set the system ID to the name of the first
client that gets a DHCP lease. This feature cannot be used with email alerts but alerts can be sent to ECM.
GPS
If you have an attached device with GPS support, you can
enable a graphical view of your router's location, which
appears in STATUS > GPS. SIM-based models with GPS
support require that the SIM be inserted. Some carriers
disable GPS support in otherwise supported modems. If
you encounter issues with obtaining a fix, contact your
carrier and ensure that GPS is supported.
Enable GPS – Enable support for querying GPS information
from capable modems.
Send to Client(s)
•
Enable this Server - Enables a local server to which
clients can connect and recieve GPS sentences.
•
Server Name - Your server's name should include only
Aa-Zz, numerals, and '_'.
•
Enable GPS server on LAN - Enables a server on the
LAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
•
Enable GPS server on WAN - Enables a server on the WAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
•
Port - Choose a port between 1 and 65535.
©2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
5/6/16
57