Head Connector Panel - Panasonic AW- PH350 Operating Instructions Manual

Connections

$Head connector panel

The camera and lens control cables are connected to this panel.
1ND/EXT connector
This is for controlling the ND filter and
lens extender of the power lens unit.
Connect it when using a power lens unit
equipped with an ND filter and lens
extender function.
ND signal
ND return
EXT signal
(As viewed from cable end)
2LENS I/F connector
This is for controlling the zoom/focus
functions of the power lens unit.
Connect the remote (zoom/focus) control
cable of the power lens unit here.
3SDI IN connector
This is for SDI signal input.
Using a coaxial cable (BELDEN 8281),
connect this with the SDI OUT connector
of an SDI card (AW-PB304), etc.
installed in the convertible camera.
CVCC (+15V)
A F
CGND
B E
C D
EXT return
4CAMERA I/F connector
This is for convertible camera control.
Connect this to the REMOTE connector
on the camera.
Use a pan-tilt head cable (optional
accessory) suitable for the application
for the connecting cable.
(See pages 23 to 28.)
19