Setting The Printed Circuit Board Switches - Panasonic AW- PH350 Operating Instructions Manual

Connections

$Setting the printed circuit board switches

The switches
CONNECTOR printed circuit boards must
be set to correspond to the signals to be
transmitted and
connected to the pan-tilt head.
(When shipped, the analog settings are
supported.)
COMP printed circuit board
CONNECTOR printed circuit board
on the COMP
components to
WEB
WEB
and
OAnalog settings
SDI/PR switch
WEB/1394 switch
WEB/RP422 switch
be
O SDI settings
SDI/PR switch
WEB/1394 switch
WEB/RP422 switch
O WEB settings
SDI/PR switch
WEB/1394 switch
WEB/RP422 switch
COMP switch
Use this at the ON position if the length of the
cable exceeds 1,640 feet (500 meters).
SDI/PR switch
RET/PB switch
Do not change the setting of this switch – use it at
the PB position.
WEB/1394 switch
1394
RP422
WEB/RP422 switch
22
: Pr
: 1394
: RP422
: SDI
: 1394
: RP422
: Pr
: WEB
: WEB