How To Change The Position Of The Connector Panel - Panasonic AW-RC400N Operating Instructions Manual

Panasonic camcorder accessories operating instructions
Table of Contents

Advertisement

Pan/Tilt Control Panel AW-RP400

How to change the position of the connector panel

The position of the connector panel can be changed from the rear panel to the bottom panel.
Before changing the position, turn off the power.
1 Remove the five bottom panel screws, and remove the
blank panel.
2 Remove the five rear panel screws, and remove the
connector panel.
3 Secure the blank panel to the rear panel using the
screws.
4 Remove the two rubber feet from the blank panel.
5 Secure the connector panel to the bottom panel using the
screws.
Remove the blank
panel.
Remove the
connector panel.
Blank panel
Connector panel
34
Screws!5 (bottom panel)
Screws!5
(rear panel)
Screws!5
(rear panel)
Remove the two
rubber feet.
Screws!5 (bottom panel)

Advertisement

Table of Contents
loading

Table of Contents