Switching The Machine Off; Settings; Setting The Dispensing Quantities - WMF 9420 series Operating Instructions Manual

7.5

Switching the machine off

Important!
Daily cleaning must be carried out before switching
off the machine (see 9.1 Daily cleaning on page 38).
1. Open the door lock
door 8 up.
2. Switch the machine off using the "On/Off" switch 13.
3. Close the front door 8.
At the end of operation the cut-off tap on the fresh
water supply line must be closed.
Important!
After switching off the machine, the main shutoff
valve on the water supply line must be closed and
the main power switch to the machine must be
switched off.

8 Settings

8.1

Setting the dispensing quantities

You can change or set the product and water quantities on
your WMF chocolate dispenser.
1. Open the door lock
door 8 up.
2. Switch the machine off using the "On/Off" switch 13.
3. Keep the product key" "
machine on with the "On/Off" switch 13.
The display shows:
4. With the "rinse button" 10, select the setting mode.
The product quantity value to be set flashes
(prod: xx):
5. With the "rinse button" 10, you come to the next setting
value. The quantity of water to be set now flashes
(wat:xx):
12 (optional) and lift the front
12 (optional) and lift the front
5 pressed and switch the
Accounting
Setting
Choc
Prod:70
"+/-" change flashing value
Choc
Prod:70
"+/-" change flashing value
/TA
/SP
cup:
Water: 80
cup
Water: 80
37