Underbody Mounted Fuel Filter Replacement - RAM 2014 5500 Owner's Manual

298 MAINTAINING YOUR VEHICLE
11. Install lid onto housing and tighten to 22.5 ft lbs
(30.5 N.m). Do not overtighten the lid.
12. Prime the engine using the procedure in "Priming If
The Engine Has Run Out Of Fuel." Then start the
engine and confirm there are no leaks.

Underbody Mounted Fuel Filter Replacement

NOTE:
• Using a fuel filter that does not meet the manufactur-
er's filtration and water separating requirements can
severely impact fuel system life and reliability.
• The underbody mounted filter housing will cause the
engine not to run if:
1. No filter is installed.
Underbody Mounted Fuel Filter Assembly
1 — Drain Valve 2 — WIF Sensor