RAM 2014 5500 Owner's Manual page 193

Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, cycle the ignition to
the ON/RUN position (do not start the engine.)
2. Press and release the DOWN arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Press and release the RIGHT arrow button to access
the "Fuel Filter Life" screen.
4. Press and hold the RIGHT arrow button for one
second to access the "Fuel Filter Life Reset" screen.
5. Press and hold the RIGHT arrow button for one
second to access the Reset Confirmation screen.
6. Press and release the UP or DOWN arrow button to
select "Yes" or "No" then press and hold the RIGHT
arrow button to reset the Fuel Filter Life.
UNDERSTANDING YOUR INSTRUMENT PANEL 191
7. Press and release the Up arrow button to exit the EVIC
screen once the Fuel Filter Life is 100%
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Oil Life Reset
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
NOTE: Use the steering wheel EVIC controls for the
following procedure(s)
3