Blind Spot Monitoring; Power Sunroof - Dodge 2016 CHALLENGER User Manual

O P E R A T I N G Y O U R V E H I C L E

BLIND SPOT MONITORING

The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located inside the
rear bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motor-
cycles etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
The BSM warning light, located in the outside mirrors, will illuminate if a vehicle moves
into a blind spot zone.
The BSM system can also be configured to sound an audible (chime) alert and mute the
radio to notify you of objects that have entered the detection zones.
Refer to "Blind Spot Monitoring" in "Understanding The Features Of Your Vehicle" in your
Owner's Manual on the DVD for further details.

POWER SUNROOF

The power sunroof switch is located on the overhead console.
Opening Sunroof
Express Open
Push the switch rearward and release it within one-half second. The sunroof will fully open
and stop automatically.
Manual Open
Push and hold the switch rearward to open the sunroof. Any release of the switch will stop
the movement, and the sunroof will remain in a partially open position until the switch is
pushed again.
Venting Sunroof
Push and release the button and the sunroof will open to the vent position.
This is called "Express Vent" and will occur regardless of sunroof position. During Express
Vent operation, any movement of the switch will stop the sunroof.
Closing Sunroof
Express Closing
Push the switch forward and release it within one-half second. The sunroof will fully close
automatically from any position.
Manual Closing
Push and hold the switch forward to close the sunroof. Any release of the switch will stop
the movement, and the sunroof will remain in a partially closed position until the switch
is pushed again.
64