Dodge 2016 CHALLENGER User Manual page 200

M A I N T A I N I N G Y O U R V E H I C L E
Chassis — 5.7L Manual Transmission
Component
Manual Transmission
Brake Master Cylinder
Rear Axle – With Manual
Transmission
Engine — 6.4L
Component
Engine Coolant
Engine Oil
Engine Oil Filter
Spark Plugs
Fuel Selection
Chassis — 6.4L Automatic Transmission
Component
8-Speed Automatic Trans-
mission
Brake Master Cylinder
Rear Axle
198
Fluid, Lubricant, or Genuine Part
We recommend you use MOPAR ATF+4 Automatic Trans-
mission Fluid.
We recommend you use MOPAR DOT 3, SAE J1703. If
DOT 3 brake fluid is not available, then DOT 4 is accept-
able.
We recommend you use MOPAR LSD Synthetic Gear Lubri-
cant SAE 75W85 (API GL-5).
Fluid, Lubricant, or Genuine Part
We recommend you use MOPAR Antifreeze/
Coolant 10 Year/150,000 Mile Formula OAT
(Organic Additive Technology).
For best performance and maximum protec-
tion under all types of operating conditions,
the manufacturer only recommends full syn-
thetic engine oils.
The manufacturer recommends the use of
Pennzoil Ultra 0W-40 or equivalent MOPAR
engine oil meeting the requirements of FCA
Material Standard MS-12633 for use in all
operating temperatures.
We recommend you use MOPAR Engine Oil
Filters.
We recommend you use MOPAR Spark
Plugs.
91 Octane or higher, 0-15% Ethanol.
Fluid, Lubricant, or Genuine Part
Use only MOPAR ZF 8&9 Speed ATF Automatic Transmis-
sion Fluid, or equivalent. Failure to use the correct fluid
may affect the function or performance of your transmis-
sion.
We recommend you use MOPAR DOT 3, SAE J1703. If
DOT 3 brake fluid is not available, then DOT 4 is accept-
able.
We recommend you use MOPAR LSD Synthetic Gear Lubri-
cant SAE 75W85 (API GL-5).