Ask Proxima M2+ User Manual page 33

U s i n g
26
Downloaded From projector-manual.com ASK Manuals
t h e P r o
Service menu
F 21
IGURE
Service menu
• Factory reset
lamp time) to the original factory settings. Highlight it, then
press
Select
reset, or press the right arrow button to highlight No, then
press
Select
: This read-only window provides information on the pro-
• Info
jector's software, the number of hours the current lamp has
been in use, and selected image settings. Press
this window.
• Reset lamptimer
replacing the lamp (page 30), highlight Reset lamptimer, press
, then press it again to confirm your selection. The timer
Select
in the Info window resets to zero.
• Service Code
sonnel by entering a code.
j e c t o r
: This resets all options (except rear, language, and
. A confirmation dialog box appears. Press
if you don't want a reset.
: This resets the lamp hour timer to zero. After
: This window can only be accessed by service per-
to
Select
to close
Select