User's logo menu
This menu allows you to display a blank blue or black screen
instead of the default screen at startup and when no source is
detected. It also allows you to capture and display a custom logo.
Highlight the desired color (black or blue), then press
•
To capture a custom logo:
1 Display the image you want to capture on your computer,
highlight Capture New, then press
2 Use the keypad arrows to position the capture rectangle
around your logo, then press
3 Select the quality of the logo capture and press
While the capture is underway, the LED on the keypad
•
turns red. When ready, the projector confirms the capture
and the LED changes to green.
The next time you start the projector, the custom logo you cap-
tured displays.
Downloaded From projector-manual.com ASK Manuals
User's logo menu
.
Select
.
Select
Select
F
22
IGURE
.
Select
NOTE: The higher quality capture
.
you select, the more memory will
be used in the capture process. To
use less memory, select good or
medium as the capture quality.
27