M
a
i
n
t
34
Downloaded From projector-manual.com ASK Manuals
e
n
a
n
c
e
Problem: Only the start-up screen displays
Verify that the cables are connected correctly. See page 7 for
•
connection procedures.
Make sure that the cables do not have any bent pins.
•
Verify that the proper input source is connected. See "Com-
•
puter and Video and Source/Select" on page 18.
Try resetting the projector. See page 22.
•
You might need to turn everything off and power up the
•
equipment again in the proper order. Refer to your com-
puter's documentation to determine the correct order.
Make sure your laptop's external video port is turned on. See
•
your computer's manual for details.
Make sure your computer's video board is installed and con-
•
figured correctly.
Make sure your computer has a compatible video board. The
•
projector isn't CGA or EGA compatible.
If you're using Windows 98:
1 Open "My Computer" icon, the Control Panel folder and
2 Click the Settings tab.
3 Verify that the Desktop area is set to 1280x1024 or less.
Problem: Color or text not being projected
You might need to adjust the brightness up or down until the
•
text is visible. Refer to "Brightness" on page 21 for more infor-
mation.
Problem: The screen resolution is not right
Make sure the computer's video card is set for a resolution of
•
no greater than 1280x1024.
Problem: Image isn't centered on the screen
Move the projector to reposition the image.
•
Reposition the image using the menu. Refer to page 23.
•
Be sure the projector lens is at a 90 degree angle to the screen.
•
&
T r
o
u
b
then the Display icon.
l
e
s
h
o
o
t
i
n
g