Call Charge Information - Panasonic KX-TD208E Product Description

ISDN2 Q931 (Euro ISDN) Interface
The ISDN2 interface and associated equipment allows the connection of Basic Rate ISDN to the KX-TD208E. A
maximum of 4 ISDN2 channels can be connected to one KX-TD208E cabinet. Connection of the digital circuits
will reduce the number of analogue lines which can be connected to the system.
ISDN2 Features
The following features are supported by the KX-TD208E ISDN2 (Q931) interface
Direct Dial In

Call Charge Information

Calling Line Identity
DDI requires rental of network services.
Note : CCI is not currently supported by the BT network.
ISDN2 Feature Descriptions
Direct Dial In
The network can send the last digits of the number dialled by the caller to the KX-TD208E. This string can be 1
to 6 digits in length dependant upon configuration and network services being subscribed to by the user. The
KX-TD208E will use these digits to route the call to a specific extension or group of extensions using a look-up
table.
Call Charge Information
When using the ISDN2 interface the KX-TD208E can receive the cost of the call whilst in progress and display it
on the LCD display. On completion of the call print the precise cost of the call as part of the call logging output.
The cost of calls made by a specific extension can also be printed as a report.
The call charge is sent to the KX-TD208E during the call. This data can be printed on the call logger and
displayed on the digital telephones with LCD.
Note : This feature is not currently supported by BT.
Calling Line Identity
The calling party's number can be displayed on a keyset with LCD.
Panasonic Digital Super Hybrid System
Product Description
(DDI)
(CCI)
(CLI)
25
ISSUE 1 E & O E