Omron NV3Q Connection Manual page 106

Web Controller Series
Communications Settings
9-3-1 RS-232C Connections
Connecting to the EH-
RS05 with a user-made
cable.
82
The following communications settings are recommended for the PT and
PLC.
■ PT Communications Settings (Set from the NV-Designer using the NV
Configuration.)
Item
Baud rate
Data bits
Stop bits
Parity
■ PLC Communications Settings
Web Controller Serial Port Settings
To set the serial port, start a Web browser on your computer and access the
System Configurator page in the Web Controller. Make the following settings.
Item
Protocol
*1
Interface
Communications
control procedure
Baud rate
*1 The interface depends on the communications method.
*2 Refer to the Web Controller User Manual for the communications setting
procedure.
Hitachi PLC
19,200 bps
7
1
Even
Passive-HIPROTOCOL
RS-232C: RS-232C
RS-422A: RS-422A/RS-485
RS-485: RS-422A/RS-485
Transmission control procedure 1 (no station numbers), 1:1
communications
19,200 bps
User-made
EH-RS05
cable
Section 9-3
Setting
Setting
PT