Television Operation - Panasonic DMR-E30 Operating Instructions Manual

Television operation

You can control televisions by changing the remote control code.
Preparation
≥ Turn on the television.
≥ Switch [DVD, TV] (15) to "TV".
1
Refer to the chart below for the code for your
television.
2 Press and hold [TV, Í] (14) and enter the two-digit
code with the numeric buttons. (4)
≥ For example: 01, press [0] ) [1].
≥ After entering the code, test the remote control by turning on
the television and changing channels.
Note
≥ If there is more than one code, repeat the procedure until you find
the code that allows correct operation.
≥ Repeat this procedure after you change the batteries.
≥ If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote is
not compatible with your television.
List of TVs Compatible with the unit's Remote Control
Brand:
Panasonic
AIWA
AKAI
BLAUPUNKT
BRANDT
BUSH
CURTIS
DESMET
DUAL
ELEMIS
FERGUSON
GOLDSTAR/LG
GOODMANS
GRUNDIG
HITACHI
INNO HIT
IRRADIO
ITT
JVC
LOEWE
METZ
MITSUBISHI
MIVAR
NEC
NOKIA
NORDMENDE
ORION
PHILIPS
PHONOLA
PIONEER
PYE
RADIOLA
SABA
SALORA
SAMSUNG
SANSUI
SANYO
SBR
SCHNEIDER
SELECO
SHARP
SIEMENS
SINUDYNE
SONY
TELEFUNKEN
THOMSON
TOSHIBA
WHITE WESTINGHOUSE
Code
01, 02, 03, 04, 44
35
27, 30
09
10, 15
05, 06
31
05, 31, 33
05, 06
31
10
31
05, 06, 31
09
22, 23, 31, 40, 41, 42
34
30
25
17, 39
07
28, 31
06, 19, 20
24
36
25, 26, 27
10
37
05, 06
31, 33
38
05, 06
05, 06
10
26
31, 32, 43
05, 31, 33
21
06
05, 06, 29, 30, 31
06, 25
18
09
05, 06, 33
08
10, 11, 12, 13, 14
10, 15
16
05, 06
Operation:
On and off:
Video input mode:
Channels:
Volume:
Numeric:
ª The 3 methods for switching to the AV input on your
Panasonic TV
Your Panasonic TV uses one of 3 different methods for switching
between TV reception and the AV input(s). Perform the operations
steps listed for the switching methods A, B and C below to
determine which one your Panasonic TV uses.
A
1) Switch [DVD, TV] (15) to "TV".
2) Press [AV] (3) to switch to the AV input.
Each press of [AV] (3) switches between "TV reception" and
"AV input(s)".
B (for the remote control code No.44)
1) Switch [DVD, TV] (15) to "TV".
2) Press [AV] (3).
Colour bars for selecting the AV input appear on the TV
screen.
3) Follow the instructions displayed on the TV screen to select
the desired AV input from the displayed colour bars for the AV
input by pressing [A] (29), [B] (28), [C] (33) or [D] (34) on the
remote control.
C (for the remote control code No.01)
1) Switch [DVD, TV] (15) to "TV".
2) Press [AV] (3).
The last previously selected AV input indication appears on the
TV screen. The indications for selecting another AV input also
appear, but they disappear a few seconds later.
3) Before the indications for selecting another AV input
disappear, press [A] (29), [B] (28), [C] (33) or [D] (34) to
select the desired AV input.
With the following four buttons, you can move and select as
follows:
[A] (29): Move left
[B] (28): Move down
[C] (33): Move up
[D] (34): Move right
9
The remote control (continued)
Button
[TV, Í ] (14)
[AV] (3)
[CH, W , X ] (18)
[VOLUME, i , j ] (19)
[0-9, -/--] (4)