NEC UNIVERGE SV8100 DT7 SERIES User Manual page 11

Note: You connect to the other party.
24
To join a Meet Me External Page:
1. Press the Speaker key or pick up the handset.
2. Dial 865.
3. Dial the announced External Paging Zone (0~8). Note: You connect to the other
party.
BACKGROUND MUSIC
To turn Background Music on or off:
1. Press the Speaker key.
2. Dial 825.
3. Press Speaker to hang up.
8
SET RELOCATION
To exchange two terminals:
1. Pick up the handset or press the Speaker key.
2. Dial the Extension Data Swap Service Code. (needs to be set up in advance)
3. Dial the Extension Data Swap Password.
4. Dial the extension to be swapped with or relocated to.
5. When successfully completed, confirmation tone will be heard and the display will
show completed.
6. Press the Speaker key twice.
Line Keys/Programmable Function Keys
The following functions below can be assigned to Line Keys if allowed by Class of
Service.
To Program a Line key as a Programmable Function Key:
1. Press the Speaker key.
2. Dial Service Code 851.
3. Press the Line Key to be programmed.
4. Dial the code for the desired feature plus additional data if required.
5. Press Speaker to hang up.
Note: Service Code 00 will erase the function from the key.
Note: In some cases, the Hold key needs to be pressed before pressing the Speaker
key.
(00 - 99) (Service Code 751)
Function Number - Function Additional Data
01 DSS / One-Touch Extension number or any numbers (up to 24 digits). Press HOLD
to write.
02 Microphone Key (ON/OFF)
03 DND Key
04 BGM (ON/OFF)
05 Headset
11