How To Set The Measurement Units - MV Agusta BRUTALE 800 RR Owner's Manual

4.4.3. How to set the measurement units

The following measurement units may be changed at
the same time:
• Speed
• Distance covered
WARNING
This operation may only be performed while
the engine is off, the gears are in neutral, the
motorcycle is stationary, and with the feet on
the ground. Do not set the display functions
while riding as it may cause loss of control,
resulting in an accident, personal injury or
death.
Access "RUN" and press "SET" repeatedly until
"UNIT CHANGE" appears.
Press "OK" for over four seconds; the measurement
unit of the speedometer starts blinking.
OPERATION
- 81 -
4
4