Konica Minolta bizhub C3100P User Manual page 60

4.3 Cannot print
2
On the print server, assign the drive (example: "C") of the client computer, which is shared in Step 1,
as the network drive (example: "z").
3
Install the 32-bit operating system driver on the print server.
4
Open the Properties screen in the driver installed.
5
Select the [Sharing] tab, and select the [Share this printer] check box.
6
Click [Additional Drivers].
The Additional Drivers page appears.
7
Select the [x64] check box in the [Processor] column, and click [OK].
8
Specify the folder that contains the 64-bit operating system driver.
This displays a page to request a setup information file.
9
Click [Browse], and specify the setup information file [ntprint.inf] on the client computer to which the
network drive is assigned.
% Specify the following file.
[z:\Windows\System32\DriverStore\FileRepository\ntprint.inf_xxx]
In the path above, "z" represents the assigned network drive."_xxx" at the end of this path varies
depending on the driver version.
% The setup information file may be stored at a different location depending on your client computer.
If folder [amd64] resides in the same hierarchy as that of [ntprint.inf], specify a setup information file
for 64-bit operating system under that folder. To additionally install a 32-bit operating system driver,
specify a setup information file under folder [i386] that is in the same hierarchy as that of [ntprint.inf].
10
Click [Open].
Installation starts.
11
When the installation is complete, click [Close].
Additional installation of the 64-bit operating system driver is then completed.
[Maintenance/Troubleshooting]
4
4-7