Konica Minolta bizhub C3100P User Manual page 6

1.1 Before getting started
- When carrying this machine, be sure to fold the Manual Feed Tray and hold the parts shown below.
- When the optional Lower Feeder Unit is installed, be sure to carry it separately from this machine. Also,
do not hold handles (drawers) of the Lower Feeder Unit or Right Door. Doing so may damage the Low-
er Feeder Unit.
- Before connecting the power cable of this machine to the power outlet, check that internal components
removed at the time of cleaning have been installed to their original positions.
- If your hand is stained by toner, wash it with cool water and neutral detergent.
7WARNING
-
Before cleaning this machine, turn the power off, then disconnect the power cable and interface cable.
Exercise care not to spill water or detergent inside this machine. Doing so may cause a damage of this
machine or an electric shock.
7CAUTION
-
When moving this product, be sure to hold the places specified in the user's guide and other guidance
information. Not doing so may cause injuries due to the product being dropped.
-
If any toner enters your eyes, immediately wash them with cool water, then contact your doctor.
-
The Fuser Unit is heated. The temperature of the Fuser Unit slowly reduces (wait for 1 hour).
[Maintenance/Troubleshooting]
28.3kg
62.4 lbs
1
1-3