Chapter 4: Calibration
Software version
Repeater
Saving intermediate calibration
Exit intermediate calibration without saving
Displays the Bidata software version.
The Bidata can be used as a master instrument connected directly to the
transducer, or, alternatively, as a repeating unit displaying speed and
depth information from another instrument.
Press speed to toggle between MASTER (R0) and REPEATER (R1)
operating modes.
In repeater mode:
• You cannot enter basic calibration.
• You cannot view or adjust alarms or offsets, or carry out log
calibration.
Press and hold depth and speed for 2 seconds.
Press depth and speed together momentarily.
bidata
depth
speed
depth
speed
6 sec
VERSION
d
REPEATER
19
D5041-1