4
1.3 Speed key functions
The following flow chart shows the speed key functions.
Speed
The speed display can be either knots (Kts), miles per hour (Mph), or
kilometres per hour (Kph).
Trip distance
Trip is the distance covered between power on and power off. This can
be nautical miles (NM), kilometres (KM), or statute miles (SM).
Resetting Trip Distance
Press and hold the speed key until the trip distance is zeroed - distance
flashes after 1 second and during the resetting process.
Ships log
When this value exceeds 999 NM, SM, or KM, the Bidata displays the
log as thousands (th) and, after 3 seconds, hundreds, tens, and units. For
example, 1525 nm would be displayed as 1th then 525.
ST30 Round Bidata Owner's Handbook
bidata
depth
speed
depth
speed
SPEED
TRIP
LOG
D1764-2