Base unit display
FULL
The clock needs adjusting (p. 24).
Your greeting message was not recorded
correctly. Record it again (p. 21).
The unit is in the answering system
programming mode.
The speaker volume level is set to "5".
You can select 9 levels (0–8) while using the
answering system (p. 53) or the intercom
(p. 49).
12 messages have been recorded.
Memory is full. Erase some or all of the
messages (p. 57).
The recording time is set to "Greeting only"
(p. 26). (The display is blank.)
11