Base Unit Display - Panasonic KX-TG2386 Operating Instructions Manual

Location of Controls
Handset navigator key
Throughout these Operating Instructions, the navigator key is indicated by the
arrows [d] or [B].

Base unit display

2 3
FULL
1
RINGER
OFF
4
LINE IN USE
4 "
LINE IN USE
Off (invisible)
On
Flashing
Flashing rapidly
• " " is displayed when a handset user is operating the Answering System,
IN USE
or when the Talking Keypad (p. 20, 21) or Name Announcement feature
(p. 22) is announcing a name or phone number.
5 Message counter shows:
— the total number of recorded messages. If the recording time is set to
"Greeting only", "
— the selected volume level while you are adjusting the volume (p. 24, 33).
— " " when your greeting message or memo message was not recorded
correctly (p. 24, 67).
8
Scrolls up [B] and down [d] the function menu, the Caller
List and the phone book.
Increases [B] or decreases [d] the handset ringer and
receiver/speaker volumes.
O
1 "
5
2 "
FULL
recorded. Erase unnecessary messages (p. 66).
3 "E" flashes until you set the date and time, and
flashes after a power failure. If it is flashing, set the
date and time (p. 14).
" functions as follows.
The line is free.
The line is being used.
A call is on hold on the handset or base unit or the
Answering System is answering a call (p. 61).
A call is being received.
" will be displayed (p. 26).
" indicates the base unit ringer is off (p. 18).
" flashes when no new messages can be