Selecting The Number Of Rings - Panasonic KX-TG2581ALS, KX-TG2581NZS Operating Instructions Manual

Selecting the Number of Rings

You can select the number of times the unit rings before the answering
system answers a call, from "3" to "7" or "AUTO" (for Toll Saver*).
Your phone comes from the factory set to "4".
1 Press
(FUNCTION/EXIT/CH)
2 Press or
Ö
points to "Program".
Press
3
FWD/EDIT á
Press or
4
Ö
points to "TAD program".
5 Press
FWD/EDIT á
"P" is displayed on the base unit.
Press .
6
(2)
The current setting is displayed on the base
unit.
7 Press , or
(0)
0: Selects "AUTO". "A" is displayed.
3–7: The unit will answer after the selected number of rings.
Press
8
FWD/EDIT á
A beep sounds.
To return to the standby mode, press (FUNCTION/EXIT/CH).
*Toll saver
(When set to "AUTO")
When you call the unit from a touch tone telephone:
If the unit answers on the 3rd ring, there is at least one new message.
If the unit answers on the 5th ring, there are no new messages.
Hang up when you hear the 4th ring. This will save you the toll
charge for the call.
.
repeatedly until the arrow
Ñ
(Yes key).
repeatedly until the arrow
Ñ
(Yes key).
to to set the number of rings.
(3) (7)
(Save key).
H
Save directory
Ringer volume
GF H
=Yes
H
Program
LCD contrast
GF H
=Yes
H
Save DIRECT#
Recall time
GF H
=Yes
H
TAD program
GF H
=Yes
Time/day Adj. 0
See manual for
other settings.
27