Table of Contents
Advertisement
Settings
Recharge
Recharge the battery when:
—"Recharge" is displayed on the handset,
—"
" flashes on the display, or
—the handset beeps intermittently while it is in use.
If you DO NOT recharge the handset battery for more than 15 minutes, the
display will keep indicating "Recharge" and/or "
To fully recharge the battery, the handset should be left on the base unit.
Battery information
After your Panasonic battery is fully charged (p. 13):
While in use
(TALK)
While not in use (Standby)
*Within about 3 meters
The battery operating time may be shortened depending on usage conditions,
such as viewing the Caller ID Caller List or directory list, and ambient
temperature.
As preventative maintenance, clean the handset and the base unit charge
contacts with a soft, dry cloth once a month. Clean more often if the unit is
subject to grease, dust or high humidity. Otherwise the battery may not
charge properly.
If the battery is fully charged, you do not have to place the handset on the base
unit until "Recharge" is displayed and/or "
battery life.
The battery cannot be overcharged.
Standby Mode
The handset goes into the standby mode after you finish using the
handset (making/answering a call, viewing the Caller List or directory list
etc.). The display is blank, but the handset can receive calls. The battery
operating time is conserved in this mode.
14
Operation
near the base unit*
away from the base unit
(While the handset is off the base unit)
Recharge
" will continue to flash.
Operating time
Up to 4.5 hours
Up to 3.5 hours
Up to 11 days
" flashes. This will maximize the
Advertisement
Table of Contents
