Clock Functions - AEG NC7013021M User Manual

12 www.aeg.com
6.7 Residual heat indicator
When you deactivate the oven, the
display shows the residual heat.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
You can use the functions
Duration
the same time to set the
time for how long the
appliance should operate
and when the appliance
should deactivate. This lets
you activate the appliance
with a delay in time. First set
the Duration
the End
7.2 Setting the clock functions
For Duration
function and temperature. This is not
necessary for the Minute Minder
Refer to "Setting an oven function".
1. Use
display shows the necessary clock
function.
2. Use
time.
The clock function operates. The display
shows the indicator for the clock function
you set.
When the time ends the indicator of the
clock function and "00.00" flash and an
Application
To set, change or check the time of day.
To set countdown time. This function has no effect on the op-
eration of the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
and End
and then
.
and End set the oven
again and again until the
or to set the necessary
acoustic signal sounds for 2 minutes. The
appliance deactivates.
at
Touch a sensor field to stop the acoustic
signal.
7.3 Activating Heat + Hold (if
applicable)
The Heat+Hold function keeps prepared
food warm for 30 minutes after the
.
cooking is completed.
1. Set the time with the clock functions
Duration
2. Press
display shows the symbol Keep warm
.
3. Use
"00:30".
When the function ends, an acoustic
signal sounds. The oven deactivates
automatically.
With Duration and End
, the oven deactivates
automatically.
The temperature for the set
oven function must be
above 80°C.
and / or End
again and again until the
and the display shows
.