Registration for Additional Handsets
•You can stop registration by pressing (OFF) on the handset and pressing
HANDSET LOCATOR (ALL) on the base unit.
•After you register an additional handset to the base unit, please confirm that the
other (first one and second one) pre-registered handsets display "Talk" by
pressing
handset to the base unit.
To re-register a handset to a different base unit of the same model, see pages
54 and 55.
Making Calls
Receiver
Microphone
1
Press
2
Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press
handset on the base unit or the charger.
•When a handset is engaged in an outside call, "Line in use" is shown on the
display of other handsets.
20
. If one of the handsets does not display "Talk", re-register that
.
(OFF)
Back side
Speaker
Display
(OFF)
(HOLD/INTERCOM/CLEAR)
(PAUSE/REDIAL)
or place the
Talk
Talk
1112222
Talk
00-00-00
Off
00-01-08