Panasonic KX-TG2352PW Operating Instructions Manual page 43

Press
1
(MUTE/FUNCTION)
2 Scroll to "Initial set" by pressing
, and press
Ñ
Scroll to "Voice mail" by pressing
3
, and press
Ñ
4 Scroll to "Save VM acces#" by pressing
or , and press
Ö Ñ
Enter your access number, up to 32 digits.
5
•You may enter pauses
•Each time you press
(HOLD/INTERCOM/CLEAR), a digit is erased.
To erase all digits, press and hold
(HOLD/INTERCOM/CLEAR).
Press (Save key).
6
Ö
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
To erase a stored number
Repeat steps 1 through 5 \ Press and hold
until all of the digits are erased \
•A beep sounds.
*
For quick access to your voice mail box, you may add pauses between your
voice mail box access number and your mail box password in step 5.
Your voice mail box access number
Pressing (PAUSE/REDIAL) once creates a 3.5 second delay and counts as
one digit. The delay time depends on a telephone company.
For assistance, please call: 1-800-211-PANA(7262)
.
.
á
.
á
.
á
*
(see below).
Ö
EX. 1-222-333-4444 PPPP 8888
or
Ö
HInitial set
or
Ö
HVoice mail
HSave VM acces#
1234567PPP890
1234567PPP890
(HOLD/INTERCOM/CLEAR)
(Save key).
Your mail box password
Pauses
Ringer setting
--------------
Set tel line
HS register
VM tone detect
--------------
G
=Save
43