Table of Contents
Advertisement
Chapter 3 Setup
Category
Set to Disabled in X2APIC
depending on the installed OS.
Security
Set a password to restrict
operation of SETUP.
Set a password to restrict
booting.
Use Trusted Boot (TBOOT)
with an optional TPM kit.
UPS
When the server is supplied
Powerlink
with power from UPS, always
turn on the power.
If the server is turned off by
using POWER switch, leave it
OFF even when UPS supplies
power.
Keep the power OFF even
when UPS supplies power.
Description
Advanced → Processor Configuration
→ X2APIC → Disabled
The following OS must be set to
Disabled:
－ Windows Server 2008R2
－ VMware ESXi 5
Security → Administrator Password →
Security → User password
Security → Password on Boot →
Enabled
Security → Trusted Computing
Set to Enabled in the following items:
- TPM Support
- TPM State
- TXT Support
Server → Power Control Configuration
→ AC-LINK → Power On
Server → Power Control Configuration
→ AC-LINK → Last State
Server → Power Control Configuration
→ AC-LINK → Stay off
Express5800/T110h-S User's Guide
To be changed
For details, see installation
Guide.
After a password is set, the
entry of password is displayed
when SETUP is launched.
You can select this parameter
after you set a password.
If TXT Support is Enabled and
the OS is started, do not disable
TPM by a TPM management
tool. If disable TPM, TPM
Support or TXT Support
cannot be changed.
In such a case, Select Save &
Exit → Load Setup Defaults.
2. BIOS Setup Utility (SETUP)
Remark
99
Advertisement
Table of Contents
