Table of Contents
Advertisement
Chapter 1 General Description
4.3
Rear View
<Non-Redundant Power Supply Unit Model>
1
<Redundant Power Supply Unit Model>
1-(1)
1-(2)
1
AC Inlet
Sockets for connecting power cords.
The sequential numbers indicate the corresponding slot
numbers.
2
Serial Port A (COM A) Connector
A connector for connecting serial interface devices.
This cannot directly connect to a network line.
3
LINK/ACT LED (green)
LEDs for showing the access status of LAN.
4
LAN Connectors
Connectors for connecting to a network
(1000BASE-T/100BASE-TX /10BASE-T).
If Shared BMC LAN feature is enabled in ROM Utility,
LAN1 connector can also be used as the management
LAN connector. Sharing port is not recommended from
the viewpoint of performance and security.
5
SPEED LED (green/amber)
LEDs for showing the transfer speed of LAN ports.
6
Display Connector
A connector for connecting a display.
4
5
3
2
6
7
10
8
9
3
5
3
4
5
2
6
7
8
10
9
5
3
7
DC Power LED (green)
A LED for showing DC power status. The LED lights
amber during BMC initialization. The LED lights green
when the power is ON.
8
USB Connectors
Connectors for connecting USB3.0 interface devices.
9
Management LAN Connector
A LAN connector (1000BASE-T/100BASE-TX
/10BASE-T) for connecting EXPRESSSCOPE Engine 3.
This connector cannot be used as a normal LAN port. This
port cannot be used when Shared BMC LAN feature is
used.
10 UID (Unit ID) Switch/LED (blue)
A switch for turning on/off UID LED. Pressing the switch
once turns on the UID LED and pressing once more turns
off the LED.
11 PCI Slot
Slots for installing low profile PCI cards. The sequential
numbers indicate the corresponding slot numbers.
Express5800/R110h-1 User's Guide
4. Names and Functions of Parts
11-(1C)
11-(1B)
11-(1C)
11-(1B)
25
Advertisement
Table of Contents
