Table of Contents
Advertisement
ELECTRICAL SUPPLY
WARNING. This appliance must be efficiently earthed.
Wiring external to the appliance MUST be in accordance with the
current I.E.E. (BS.7671) Wiring Regulations and any local
regulations which apply.
The point of connection to the mains should be readily accessible
3
BOILER CLEARANCES
The following minimum clearances must be
maintained for operation and servicing.
Additional space will be required for installation,
depending upon site conditions.
Front clearance:
450mm from the front of the boiler
casing. The minimum front clearance
when built in to a cupboard is 5mm.
8
GENERAL
and adjacent to the boiler, except for bathroom installations
where the point of connection to the mains MUST be situated
outside of the bathroom.
Note. Where a room sealed appliance is installed in a room
containing a bath or shower then the appliance and any electrical
switch or appliance control utilising mains electricity should be so
situated that it cannot be touched by a person using the bath or
shower.
Dimension y
Boiler only
with stand-
off brackets
139mm
219mm
(5 (
")
(8
7/16
For side outlet flues:
Raise the centre line of the hole in
the wall by 5mm +4mm/100mm of
flue length
Response SE Combi -
")
5/8
Installation
Advertisement
Table of Contents
