Table of Contents
Advertisement
Quick Links
Model 1218
Designer Series
Indoor, Light Duty Pan/Tilt
Installation and Operating Instructions
This manual describes the installation and operating procedures for the American Dynamics model 1218 Unit. The 1218 Pan/Tilt
is a high quality, light duty unit which has been specifically designed for indoor operation. The unit has been specially developed
for small CCD cameras and camera housings. It is quick and easy to install with easily adjustable limit stops. The 1218 is
available with and without presets.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for American Dynamics 1218
Summary of Contents for American Dynamics 1218
- Page 1 The unit has been specially developed for small CCD cameras and camera housings. It is quick and easy to install with easily adjustable limit stops. The 1218 is...
- Page 2 Information furnished by AMERICAN DYNAMICS is believed to be accurate and reliable. However, no responsibility is assumed by AMERICAN DYNAMICS for its use; nor for any infringements of other rights of third parties which may result from its use. No license is granted by implications or otherwise under any patent or patent rights of AMERICAN DYNAMICS.
- Page 3 American Dynamics Repair and Service Department at (800) 442-2225. You must obtain a Return Authorization Number and shipping instructions before returning any product for service.
-
Page 5: Table Of Contents
Table of Contents Description ............... Installation..............Mounting ..............Ceiling Mounting ........... Wall Mounting ..........Connections, Adjustments........Connecting the Pan/Tilt ......... Adjusting Angles of Movement..... Dimensions............... Specifications ............back page... -
Page 8: Mounting
The 1218 is supplied with a ceiling mount (see Figure 2) • Bolt the 1218 unit to the bracket using the three 6 mm bolts adapter plate bolted to the base. The base has four holes which and washers supplied as shown in Figure 3. The ceiling accept 6 mm bolts on a 4-inch (101.6 mm) diameter. -
Page 9: Connections, Adjustments
Allen wrench. • Rotate the arms until the desired pan range is achieved. Figure 6 - Adjusting Tilt Axis Angle of Movement • Re-tighten the Contact Arm set-screws and test the 1218 for correct pan operation. Pan Limt Switch Rocker Arm... -
Page 10: Dimensions
2 . 5 6 2 5 " (65.09 mm) 5 . 6 2 5 " (142.88 mm) 2 . 7 5 " (69.85 mm) .375" (9.53 mm) 2 . 7 5 " (69.85 mm) 3.94" (100 mm) Figure 7 - 1218 Dimensions... -
Page 12: Specifications
12 VDC operation with no presets AD1218/12DCP Same as AD1218/12DC with factory installed feedback potentiometers. Provides pan and tilt position feedback for control by equipment having the same feature. An American Dynamics Product Designed and built by Sensormatic CCTV Systems Division One Blue Hill Plaza...
Need help?
Do you have a question about the 1218 and is the answer not in the manual?
Questions and answers