Table of Contents
Advertisement
O t h e r
* Last Number Redial can also
be used with Single Line
Telephones by pressing [#].
U s e f u l F e a t u r e s
dialling, Message Waiting, Call
Forward/Do Not Disturb, Saved
Number Redial, Account Code,
Conference, Log-in/Log-out, Voice Mail
Access, Day/Night mode switch,
Answer/Release, and ISDN service
access.
Quick Dialling
Allows users to assign simple codes to
frequently-used numbers.
Redial
1. Automatic Redial
outside party for a pre-determined
time until the called party answers,
by pressing the SP-Phone and
Redial keys. Available with Digital
System Telephones with
speakerphone (except for KX-
T7560/T7565).
2. Last Number Redial
outside party once, by going off-
hook and pressing Redial key.
Available with Digital System
Telephones*.
3. Saved Number Redial
saved number by pressing the SAVE
button.
Timed Reminder (Wake-up Call)
Telephone issues an alarm tone at a
pre-set time. Each user can set Timed
Reminder on their own extension, and
the Manager Extension and Operators
can remotely set Timed Reminder to
other extensions (Remote Timed
Reminder).
Trunk Answer From Any Station
(TAFAS)
Allows users to answer the incoming
call through the external paging device
from any telephone. When the ringing
tone is heard from the external paging
speaker, any user can answer that call
by dialling a special code.
Whisper OHCA
Informs the extension users of a call
waiting quietly, through the handset,
without the other party hearing the
announcement. The user can reply to
the announcement by putting a current
call on hold. Please also see "Off-Hook
Call Announcement (OHCA)" in this
section (available with KX-T74 Series
and T75 Series only).
,
$
Call Forwarding Unconditional
(CFU), Busy (CFB), No Reply
(CFNR)
Allows users to forward incoming calls
to another outside destination using the
services provided by network
operators. Even when there is an
incoming call that is transferred to
another outside destination, the ISDN
í
line (B-Channel) will not be occupied.
Redial a busy
Calling Line Identification
Presentation (CLIP)
Shows the calling party's telephone
number and name (if registered in the
system) on the Digital System
Telephone display when receiving an
í
incoming outside call. When making an
Redial a busy
outgoing call, users can have their
telephone numbers displayed on the
called party's telephone. Users can
select the telephone number shown at
í
the called party either from the
Redial the
company number or their own number.
Calling Line Identification
Restriction (CLIR)
When making an outgoing call, users
can have their telephone numbers not
be displayed on the called party's
telephone.
Connected Line Identification
Presentation (COLP)
Shows the connected telephone
number and name of the called party (if
registered in the system) on the Digital
System Telephone display when
making an outgoing call. When
receiving an incoming call, users can
have their telephone numbers displayed
on the calling party's telephone. Users
can select the telephone number shown
at the calling party either from the
company number or their own number.
Connected Line Identification
Restriction (COLR)
When receiving an incoming call, users
can have their telephone numbers not
be displayed on the calling party's
telephone.
)
0,9:708
Advertisement
Table of Contents
