Panasonic KX-TD7690 User Manual page 94

Hybrid ip-pbx system
Hide thumbs Also See for KX-TD7690:
Table of Contents

Advertisement

Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not spilled into, the
unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or shock.
3) Place the unit on a flat surface.
For best performance
1) If noise prevents the conversation from being understood at the handset, approach the Cell
Station to lessen the noise.
2) The handset should be used at the HIGH volume setting when the reception tone is difficult
to hear.
3) The handset should be fully recharged on the charger when "CHARGE BATTERY" is
displayed and/or "
4) The handset antenna should not be touched during use because of its high sensitivity.
5) The maximum calling distance may be shortened when the unit is used in the following
places: near obstacles such as hills, tunnels, undergrounds, near metal objects such as
wire fences, etc.
Medical-consult the manufacturer of any personal medical devices, such as pacemakers, to
determine if they are adequately shielded from external RF (radio frequency) energy. (The unit
operates in the frequency range of 2,401MHz to 2,480MHz, and emits 0,40 watts of RF [radio
frequency] power.) Do not use the unit in health care facilities if any regulations posted in the
area instruct you not to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF (radio frequency) energy.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
• Keep the unit away from heating appliances and electrical noise generating devices such as
fluorescent lamps and motors.
• The unit should be kept free of dust, moisture and vibration, and should not be exposed to
direct sunlight.
• Do not use benzine, thinner, or any abrasive powder, to clean the cabinet. Wipe it with a soft
cloth.
•The unit should be situated so that the location or position does not interfere with its proper
ventilation. Allow 10 cm (4 inches) clearance around the unit.
(needs to be changed)" flashes.
Important Information
47

Advertisement

Table of Contents
loading

Table of Contents