Preparation; Connections - Panasonic KX-TG1313EG Operating Instructions Manual

TG1311_1312_1313EG(e).book Page 5 Tuesday, October 21, 2008 5:04 PM

Preparation

Connections

Base unit
The base unit can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV207CE.
L Use only the supplied telephone line cord. Using another telephone line
cord may not allow the unit to work properly.
30 mm
Screws
(Not supplied)
Charger
Available for:
KX-TG1312/KX-TG1313
The charger can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV209CE.
Hooks
(220-240 V AC, 50 Hz)
Note:
L Never install telephone wiring during a lightning storm.
L Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
To telephone line
During a power failure
The unit will not work during a power failure. We recommend connecting a
corded-type telephone (without AC adaptor) to the same telephone line or
to the same telephone line jack using a T-adaptor.
Hooks
(220-240 V AC, 50 Hz)
Preparation
25.2 mm
Screws
(Not supplied)
5