Panasonic KX-TG1313EG Operating Instructions Manual page 15

TG1311_1312_1313EG(e).book Page 15 Tuesday, October 21, 2008 5:04 PM
Guide to base unit settings
To customise the base unit (general approach):
1
{j/OK}
2
Press {v} or {e} to select "SETTING BS". i {>}
L "INPUT CODE" is displayed.
3
Enter the desired code number. Follow the instructions in the "Feature"
column of the chart.
L To exit the operation, press {ih}.
Code No. Feature (default setting)
Reset base unit to its default settings.
{0}
− Enter base unit PIN (default: "0000").
Dialling mode (Tone): page 9
{3}
Recall/flash time (600 ms)
− Enter base unit PIN (default: "0000").
{1}
− Select the desired setting by pressing {1} for 100 ms,
{2} for 600 ms or {3} for 300 ms. i {>}
DTMF mode (Off): page 17
Change base unit PIN ("0000").
{5}
− Enter the current 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN again.
*1
*2
i {>}
*3
*2
i {2} i
*4
*2
Code No. Feature (default setting)
*5
Call restriction
{6}
■ Setting call restriction
− Enter base unit PIN (default: "0000").
the desired handset number by pressing the
appropriate dial key.
L The selected handset number flashes on the
display.
− {>}
− Enter the phone number to be restricted (8 digits
max.).
L To select a different memory location, press {>}
and enter a number.
− {>}
■ Turning on/off call restriction
− Enter base unit PIN (default: "0000").
L Handset number is displayed. A flashing number
indicates call restriction is on; a non-flashing
number indicates call restriction is off.
− Enter the desired handset number by pressing the
appropriate dial key to turn on/off. i {>} 2 times
*6
Emergency number
− Enter base unit PIN (default: "0000").
■ Storing:
− Enter the emergency number (8 digits max.).
L To select a different memory location, press
{>} and enter a number.
− {>}
■ Editing:
Press {>} to display the desired number. i {C}
i Enter the new emergency number. i {>}
Useful Telephone Settings
*2
i Enter
*2
*2
i {*}
15