Listening To Tapes - Panasonic SC-AK17 Operating Instructions Manual

1
5
2
1
2
3
4
5
6
A

Listening to tapes

Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
6
NORMAL POSITION/TYPE I
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
2
You can use either deck 1 or deck 2 for tape playback.
4
1
3
2
3
Front side
4
5
To stop tape playback
Press [L].
Tape direction To change the deck to be used
Press [TAPE DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select "
played 8 times each.
Note
Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
Deck in use
Press [TAPE].
The system will come on automatically.
Press [c DECK 1 OPEN] or [c DECK 2 OPEN] and
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Except for SC-AK17 model and SC-AK27 Australia and
New Zealand model
Press [DOLBY NR].
You have to turn Dolby NR ON/OFF according to the type of
recording you made.
Every time you press the button: p NR W (OFF)
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side is played, then playback stops automatically.
: Both sides (front side
time each, then playback stops automatically.
: Both sides are played 8 times each, then playback stops
automatically.
Press [/] or [-] to start playback.
- : The forward side (front side) will play.
/ : The reverse side will play.
Adjust the volume level.
A
_
_
_
reverse side) are played one
". Both tapes will be
19
RQT4708