Listening To Tapes - Panasonic SC-AK78 Operating Instructions Manual

1
2
3
1
2
3
4
Tape direction
5
Deck in use

Listening to tapes

Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
5
N O R M A
4
I H G H
M E T A L
You can use either deck 1 or deck 2 for tape playback.
1. Press [TAPE DECK 1/2].
The power will come on automatically.
If the unit was off and a cassette was loaded, play will start auto-
matically (One touch play function).
2. Press [
and insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Front side
3. Press [REV MODE] to select the reverse mode.
Every time you press the button;
: One side is played, then playback stops automatically.
: Both sides (front side
each, then playback stops automatically.
: Both sides are played 8 times each, then playback stops
automatically.
4. Press [
[ ]:
[ ]:
5. Turn [VOLUME] to adjust the volume level.
To stop tape playback
Press [ ].
To change the deck to be used
Press [TAPE DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select
8 times each.
Note
Playback is interrupted while playing back tapes if you open the other
deck.
!
L P O I S I T O N / T Y P E
@ @ @ @ @
P O I S I T O N / T Y P E
$ $ $ $ $
P O I S I T O N / T Y P E
DECK1 OPEN ] or [
reverse side) are played one time
] or [ ] to start playback.
The forward side (front side) will play.
The reverse side will play.
. Both tapes will be played
DECK2 OPEN]
21
RQT5289