Listening to tapes
Type of tape which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSmON/TYPE I
O
HIGH POSITION/TYPE II
O
METAL POSITION/TYPE IV
O
You can use either deck 1 or deck 2 for tape playback.
□
Press TAPE DECK 1/2.
The power will come on automatically.
Press DECK 1 ^ OPEN or DECK 2 ^ OPEN, and
then insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Press REV MODE to select the reverse mode.
Every time you press the button;
t_I
; One side is played, then playback stops automatically.
; Both sides (front side -¥ reverse side) are played one
time each, then playback stops automatically
CUD: Both sides are played 8 times each, then playback stops
automatically.
Press ^ or ► to start playback.
►: The forward side (front side) will play.
The reverse side will play
Adjust the volume level.
To stop tape playback
Press ■.
To change the deck to be used Q
Press TAPE DECK 1/2 to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select
Both tapes will be played
8 times each.
raw
Playback is interrupted while playing back tapes, if you open the
other deck.
One-touch play
When power is OFF, playing starts automatically when you press
TAPE DECK 1/2.