Select Earth/Flash Mode; Select Pause Timing - Panasonic KX-TCD700NL Operating Instructions Manual

30401 English KX-TCD700NL
Programmable Functions (On the Base Unit)

Select Earth/Flash Mode

The earth relay can be installed as an option depending on your PBX requirements.
Please consult your nearest Panasonic Service Centre for installation. Then you can
select the flash or earth mode. The factory pre-set is Flash.

Select Pause Timing

You can set the pause timing to 3 or 5 seconds, depending on your PBX
requirements. The factory pre-set is 3 seconds.
(Standby Mode)
• Select Earth.
• Enter PIN (4 digits)
• Current setting is displayed.
1 = Flash
2 = Earth
eg. Earth is selected.
or
• A confirmation tone
sounds.
• Display returns to function
menu.
25/4/01 2:32 pm
or
• Select Flash Timing.
• Enter PIN (4 digits)
• Earth is selected.
Current setting is displayed.
(If Flash is already selected
• Current setting is displayed.
1=Flash 1 (700m sec)
2=Flash 2 (110m sec)
Flash time.
eg. Flash 1 is selected.
• A confirmation tone
sounds.
• Display returns to function
menu.
Page 42
or
to select Flash.
).
- to select
or
42
or
• Select Pause Timing.
• Enter PIN (4 digits)
• 3 seconds is selected.
or to
select Pause time.
eg.
1 = 3 seconds
2 = 5 seconds.
or
• A confirmation tone
sounds.
• Display returns to
function menu.