Setting The Clock - Panasonic KX-TCD700NL Operating Instructions Manual

30401 English KX-TCD700NL
To Select the Base Unit Ringer Volume
4 levels are available. The factory pre-set is MEDIUM. When set to OFF, the
base unit will not ring.

Setting the Clock

To set clock, please program as below. The clock can be displayed as an
option in standby mode (see page 31). After a power failure the clock will need
re-setting. Clock may take up to one minute to appear on the handset display.
(Standby Mode)
• Select Ringer Volume
Current setting is displayed
-
volume
0 = Ringer OFF
1 = Low Volume
2 = Medium Volume
3 = High Volume
(Ringer sounds on selection)
or
• A confirmation tone sounds.
• Display returns to function
menu.
25/4/01 2:32 pm
or
to select
Page 41
or
41
or
• Setting the Clock.
• If the clock has been
set previously, time
will be displayed.
Enter new time
(4-digits) eg.
, ,
(24 hour clock)
• A confirmation tone
sounds.
• Display returns to
function menu.