Table of Contents
Advertisement
30401 English KX-TCD700NL
Making Calls
To Edit/Clear Numbers in the Redial List
To edit and clear numbers in the redial memory, press
then follow from step 2 (page 20).
Direct Call
You can store one number into memory and then call this number by pressing
Incoming calls are accepted. To use this feature, store the direct call number and
turn on the mode by programming (see page 32). The factory pre-set is OFF.
Dialling the Stored Number
Make sure that " " is displayed (see page 32), then
• The number stored in the direct call memory is dialled automatically.
• When the handset is in "direct call" mode, it is not possible to make any
calls until direct call is cancelled. This also includes emergency calls.
To Select the Receiver Volume
3 levels (HIGH, MEDIUM, LOW) are available. The factory
pre-set is MEDIUM.
1. During conversation,
= receiver volume up
= for receiver volume down
= HIGH,
2. After volume selection,
(The display returns to length of call, etc).
Dialling a Stored Hot Key Number
(To register a number as Hot Key, see page 17).
You can assign up to 9 phone numbers in the speed dial list as hot key dials. The
dialling buttons (
1.
and hold a memory station number (
• The stored number is displayed.
• To search for a number,
2.
• The number is dialled automatically.
3. To hang up,
25/4/01
2:32 pm
or
= MEDIUM,
= LOW
to
) function as memory stations.
or
.
Page 14
, select number and
to select level
to
).
until the desired number is displayed.
14
.
.
Advertisement
Table of Contents
