Table of Contents
Advertisement
30401 English KX-TCD700NL
Basic Start-up Operations
Turning the Power On
1.
and hold
• After all characters briefly appear, a confirmation tone
sounds. The display will change to the standby mode when
the button is released.
• The current connected base unit number is displayed (
• The number of New Caller ID calls received are displayed (eg.
• You can choose whether to display the base unit number, handset number,
clock or no display in the standby mode (see page 31).
Making a Call
(For further information on making calls, see pages 13-14.)
1.
2. Dial a phone number
The dialled number is displayed.
(If a number is entered incorrectly,
After a few seconds, the display will start showing the length of the call.
Terminating a Call
1. To hang up,
• The handset will return to the standby mode.
• The dialled number is stored in the redial memory.
Answering a Call
(For further information on answering calls, see page 15.)
1.
• You can also answer a call by pressing any dialling button
to
After a few seconds, the display will start showing the length of the call.
Turning the Power Off
Make sure that the unit is in the standby mode.
1.
and hold
• The display will go blank.
(On location of the handset in the base unit, the battery icon will display even
after power off).
25/4/01
2:32 pm
.
,
or
(-Any Key Answer).
until a long beep sounds.
Page 12
).
12
)
)
Advertisement
Table of Contents
