Indoor Units; Tips For Energy Saving - Panasonic U-140PEY1E8 Operating Instructions Manual

Adjusting airflow direction
When operating multiple indoor units using 1 remote controller, airflow direction can be adjusted for indoor each unit individually or
all units at the same time.
Press the to display the Menu.
Select "2.FLAP" by pressing
or .
Then press .
Attention:
Never use your hands to move the flap (vertical airflow flap)
z
controlled using the remote controller.
Note
When the air conditioner is turned off, the flap automatically
z
moves toward the direction of closing.
The flap (vertical airflow flap) moves to the upward position
z
during standby operation for heating.
The swing operation starts after the standby operation has
z
finished, but "Swing" is indicated on the remote controller
even during the standby operation.
for multiple indoor units (remote controller only)
„ When setting the airflow direction of
1
1-1
1-2
1-3
1-4
1-8
Maximum of
z

8 indoor units

can be connected.
2
„ When setting the airflow direction of
1
2

Tips for Energy Saving

„ Avoid
Do not block the air intake and outlet of the unit.
z
(If either is obstructed, the unit will not function
well, causing malfunction.)
During cooling operation, use sunshades, blinds or cur-
z
tains to prevent direct sunlight from entering the room.
„ Do
Always keep the air filter clean.
z
(A clogged filter will impair the performance of the unit.)
→ "Maintenance" (P.8)
To prevent conditioned air from escaping, keep win-
z
dows, doors and any other openings closed.
each indoor unit individually
Press or to select the UNIT NO.
for adjustment.
e.g.) 1 outdoor unit
and
8 indoor units
ALL
1-1
1-2
1-3
1-4
1-8
Press
.
Press or to select your desired
airflow direction.
all indoor units at the same time
Press or to select
Press
.
Press or to select your desired
airflow direction.
e.g.) 2 outdoor units
and
4 indoor units
E
ALL
1-1
1-2
1-3
1-4
2-1
2-4
.
ALL
NGLISH
7