Tele Macro; Volume Adjustment - Panasonic HDC-SD100 Operating Instructions Manual

Function

Tele macro

Headphone

volume adjustment

Fade:
≥ The thumbnails of scenes recorded using fade
in become black (or white).
≥ It will be cancelled automatically once the
recording time for one scene exceeds 12
hours.
Help mode:
≥ When the help mode is used, functions cannot
be set.
≥ When the help mode is used, motion pictures
and still pictures cannot be recorded.
Self-timer:
≥ The self-timer standby mode is cancelled when
you press the recording start/stop button to
start motion picture recording.
Even if you press the recording start/stop
button while the self-timer is counting down,
motion picture recording is not possible.
≥ Setting the self-timer to [Ø2] is a good way to
prevent image shake when the
pressed while using a tripod etc.
Intelligent contrast control:
≥ If there are extremely dark or bright parts or the
brightness is insufficient, the effect may not be
clear.
This is for close-ups bringing only what you want to record
into focus. By focusing only on the subject and blurring the
background, the image can be impressive.
≥ The unit can focus on the subject at a distance of approx.
40 cm.
≥ If the magnification is 12k or less, then it is automatically set
to 12k.
Adjusts the volume of the headphone while recording.
:Increases the volume
:Decreases the volume
≥ Actual volume to be recorded does not change.
Automatic face detection
≥ In the following case, faces may not be
detected in some recording conditions.
jFaces are not full-faces
jFaces tilt
jFaces are extremely bright or dark
jShadows on faces are a few
jFaces are not completely exposed (for
instance wearing sunglasses)
jThe size of a face is small on the screen.
jThe subject moves quickly.
jWhen the hand shakes
jWhen the digital zoom is used
jWhen the unit is tilted
≥ In the following cases, the function may not
operate properly even if faces are detected. If
this occurs, turn off this function.
jNonhuman subjects are recognised as
faces.
jWhen the brightness or quality cannot be
adjusted clearly since scenes are extremely
button is dark, or the areas around the faces or the
background is extremely bright.
≥ Since the brightness of the entire image is
adjusted to record faces more vividly,
brightness may change suddenly or images
may flicker under some recording conditions.
≥ When the face detection frame disappears due
to zooming, the brightness may change
suddenly or the images may flicker.
Effect
51
VQT1T81