Tele Macro; Colour Night View - Panasonic HDC-SDX1 Operating Instructions Manual

Tele macro

A more impressive image can be obtained by focusing on the object only in close-up
and shading off the background.
≥ The unit can focus on the subject at a distance of approx. 50 cm.
≥ If the magnification is 20k or less, then it is automatically set to 20k.
≥ The tele macro function is cancelled when the zoom magnification becomes lower than
20k.
Guideline
You can check if the image is level while recording or playing back motion pictures
and still pictures. The function can also be used to estimate the balance of the
composition.
It will switch every time the icon is touched.
# #
≥ The guidelines do not appear on the images actually recorded.
∫ Displaying Guidelines at playback
≥ Change the mode to
[AVCHD] or [SD CARD]/[MP4]. (l 28)
: [VIDEO SETUP] # [GUIDE LINES] # desired setting
≥ To cancel the Guideline function during playback, set to [OFF].
≥ It cannot be set while in still picture playback mode.

Colour night view

This function allows you to record colour images in very low light situations.
(Minimum required illumination: approx. 1 lx)
≥ Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
≥ Using a tripod is recommended.
≥ In darker areas, auto focus may focus a bit slower. This is normal.
48
VQT2W75
# Setting cancelled
and touch the Play mode select icon to select [SD CARD]/