Quick Start; Quick Power On - Panasonic HDC-SD100 Operating Instructions Manual

Quick start

This unit will resume recording pause mode
about 0.6 seconds after the LCD monitor is
reopened.
≥ When in quick start standby mode about
60% of the power used in recording pause
mode is being consumed, so the recording
time will be reduced.
¬ Rotate the mode dial to select
1
Set the LCD/EVF select switch to
LCD. (l 31)
2
Select the menu. (l 24)
[SETUP] # [QUICK START] # [ON]
3
Close the LCD monitor while the
mode dial is set to
The status indicator A flashes green and the unit
goes into quick start standby mode.
≥ The lens cover does not close.
4
Open the LCD monitor.
The status indicator A lights red and the unit is
put into recording pause approx. 0.6 seconds
after it is turned on.
≥ Set [QUICK START] to [OFF] to cancel the
quick start mode.
≥ Quick start standby mode is cancelled if
jabout 5 minutes elapsed
jmode dial is set to
junit is turned off
36
VQT1T81
≥ Time for quick start will be more than 0.6
seconds slower in the following conditions.
jWhen the digital cinema is used
jWhen the unit is exposed to vibration or
≥ In the quick start mode, it may take some time
for automatic white balance to adjust, if the
scene being recorded has a light source
different from the scene last recorded. (When
.
the colour night view function is used, however,
the white balance of the scene last recorded is
retained.)
≥ In the quick start mode, the zoom
magnification becomes 1k and the picture size
may differ from what it was before quick start
standby mode.
≥ If [POWER SAVE] (l 26) is set to
[5 MINUTES] and the unit automatically goes
into quick start standby mode, close the LCD
monitor and then open it again.
.

Quick power on

The unit is put into recording pause approx.
1.9 seconds when the mode dial is set to
from OFF.
≥ Start time will not shorten if there is no SD card
inserted.
¬ Rotate the mode dial to select
Select the menu. (l 24)
[SETUP] # [QUICK POWER ON] # [ON]
≥ This function's default setting is [ON].
≥ Set [QUICK POWER ON] to [OFF] to cancel
the quick power on.
≥ In the quick power on mode, the zoom
magnification becomes 1k and the picture size
may differ from what it was before turning
power off.
shock
.